Hardware Latest Topics

4 Pin Power Connector for the Tinker Edge

Wed, 26 Jul 2023 07:37:12 +0000

Does anyone have the part number or brand, TE, JST, MOLEX etc, for the 4 pin power connector on the Tinker Edge?

Thanks

No boot after installing mcpie card

Tue, 25 Apr 2023 01:11:04 +0000

I installed a Quectel EC25-AF mpcie card, I know it's not on the QVL, but someone had mentioned they were using one without issue. After installing the card the tinker edge r will no longer boot and only flashed a red light on led 0. I can't find any documentation on what might be wrong. I'm hoping this thing isn't fried. Does anyone have any insight?

GPIO Tinker Edge R Android 9

Mon, 06 Feb 2023 18:50:51 +0000

Please how to acces to GPIO in Tinker Edge R with Android 9?

LTE minipcie card ec20

Sat, 07 Jan 2023 15:52:51 +0000

I inserted the ec20 module to identify that mmcli can be sent off, and nmcli can view the gsm device, but the connection process cannot be used, and mmcli shows that the sim card is invalid

camera module cable for tinker edge r

Thu, 01 Dec 2022 11:36:03 +0000

the camera module cable for this board is not as the rpi one, this one is smaller from one side. I would please like to know what is the camera cable type that comes with the tinker edge r and where I can buy a 3/5 meters cable of it.

LTE Mini PCI Express Cards for Edge R

Thu, 02 Jun 2022 00:56:07 +0000

In the qualified vendor list of devices for the ASUS Edge R, the Quectel EC21 LTE card is specified.

Are there any specific instructions that describe getting this card functioning on an Edger R or similar RK3399 based devices from ASUS?

By being on the qualified vendor list of devices are the needed devices for the Quectel EC21 LTE already present in the Linux Kernel so it's just plug-in play?

Power Supply For Tinker Edge R

Thu, 08 Sep 2022 19:34:12 +0000

Can the Tinker Edge R be powered using the VCC 5V pin on the 40 pin header? With the CPU, NPU, and 1 USB-A under operation, what will be the typical power consumption profile? Is it around 10-12W that can be supplied using the pins on the header (if possible)? My current application works towards integrating the Tinker Edge R into a remote controlled car, and if there are any other recommendations on powering the board, it will be of great help!

ASUS Tinker Edge R mPCIe Support

Fri, 21 Oct 2022 22:06:59 +0000

Dear ASUS Team,

I intend to connect the following module (using the mPCIe slot) to the ASUS Tinker Edge R and I had the following questions:

1). What is the maximum current rating of the 5V Output pin on the 40 pin GPIO header? (alternatively, I can power it through the molex connector using an external power supply)
2). As I understand through the schematics, 3.3V is available on the mPCIe header, including the USB support. Do I need any additional drivers for the USB support?
2). Can you help me with initial directions to configure the mPCIe USB and RNDIS on Tinker Edge R?

GPIO Node-Red issue / tinker edge R

Mon, 19 Sep 2022 11:18:22 +0000

Hi,

We have a Program ready for testing build with Node-red, we decide to work with tinker edge R. and we found the following discussion in asus Tinker Board Forum :

https://tinker-board.asus.com/forum/index.php?/topic/15110-how-to-use-do-on-node-red-tinkeros-gpio/&tab=comments#comment-15662

We did same steps as CyberT did , downlowded nrgpio.sh suggested by Mr yi-hsin_hung, and replaced in the eadge-R in specific folder, but unfortunately it doesn't work.

Please can you help to resolve this problem .

Thanks in advance.

SD Card

Wed, 23 Mar 2022 11:43:18 +0000

I inserted an SD Card, but I can't remove it. Please tell me how to remove the SD Card.