Software Latest Topicshttps://tinker-board.asus.com/forum/index.php?/forum/5-software/Software Latest TopicsenManualy dd image files to eMMC when booted from sd card.https://tinker-board.asus.com/forum/index.php?/topic/15046-manualy-dd-image-files-to-emmc-when-booted-from-sd-card/ Hi, I can not boot recovery.img from sd card and can not flash from computer.

If I prepare sd card following the instructions here, then flash.sh script gets stuck on: "< waiting for any device >" (visible in script debug mode), no usb device is found on my computer - lsusb shows nothing like Mendel or Tinker or Google device there. Multiple usb cables tested. Sd card is ok, because booting from it (sdcard_arm64.img) works well.

I'd like to flash the img files manualy from another flash drive using dd command from the shell when booted from sd card.

Please, what are the correct images and their /dev/??? targets to manualy dd images to emmc?

I expect these files to be flashed (taken from flash.sh script):

  1. sudo dd BS=4M if=u-boot.imx of=/dev/???  (should it be: mmcblk0boot0 ?)
  2. sudo reboot-bootloader
  3. sudo dd BS=4M if=partition-table-8gb.img of=/dev/???  (mmcblk0 ?)
  4. sudo reboot-bootloader
  5. // somehow erase misc partition - where it is?
  6. sudo dd BS=4M if=home.img of=/dev/???   (rest of mmcblk0 ?)
  7. sudo dd BS=4M if=boot_arm64.img of=/dev/???    (should it be: mmcblk0boot1 ?)
  8. sudo dd BS=4M if=rootfs_arm64.img of=/dev/???  (should it be: mmcblk0rpmb ?)

Problems:

  • sudo reboot-bootloader gives me an error: can not find misc partition.
  • sudo dd BS=4M if=u-boot.imx of=/dev/mmcblk0 works fine, but of=/dev/mmcblk0boot0 ends with an error: operation not permited.

I appreciate any help with this. 

]]>15046Tue, 11 Jan 2022 09:08:55 +0000Only ttymxc0 and ttymxc1 are checked in the list, is this normal?https://tinker-board.asus.com/forum/index.php?/topic/15183-only-ttymxc0-and-ttymxc1-are-checked-in-the-list-is-this-normal/ My tinker edge t board has two UARTs, ttymxc0 and ttymcx1.
If you don't see ttymxc2 in the get start documentation, it says to do sudo apt-get dist-upgrade. However, ttymxc2 is not visible even after rebooting after sudo apt-get dist-upgrade.
When ttymxc0 and ttymxc1 are opened for UART communication, communication is not possible, so I want to know what to do to enable uart communication.

Regards

]]>15183Mon, 18 Jul 2022 01:19:48 +0000Root FS On External SSDhttps://tinker-board.asus.com/forum/index.php?/topic/15276-root-fs-on-external-ssd/ Hi,

I'm trying to move my root file system from the eMMC to an eternal SSD.  After having followed this guide ( tinker-board-ssd-usb-booting-guide/ ) and chatting to the author it seems like there is something weird that is preventing the root fs to mount on the SSD and it always defaults to the eMMC root fs.

Any suggestions how to accomplish the above?

]]>15276Thu, 17 Nov 2022 20:30:13 +0000icon on desktophttps://tinker-board.asus.com/forum/index.php?/topic/15368-icon-on-desktop/ hello everybody, I need my users to be able to launch a bash script from the Mendel OS desktop, just by clicking an icon

is this possible?

more better, I would like that script (a bash script containing a chromium --kiosk command) launched at startup

thanks in advance for your help!

]]>15368Fri, 05 May 2023 16:26:28 +00002x Camerashttps://tinker-board.asus.com/forum/index.php?/topic/15349-2x-cameras/ Hi,

I have 2x google coral cameras connected to the Thinker Edge T but only one gets recognized:

```

mendel@deft-calf:~$ sudo v4l2-ctl --list-devices
i.MX6S_CSI (platform:30a90000.csi1_bridge):
       /dev/video0

```

I have flashed google's coral image "enterprise-eagle-flashcard-20211117215217.zip". Do you believe that I'm better flashing Tinker Edge T Mendel 5.2 Eagle V3.0.7 or is there some driver configuration missing?

Thanks

]]>15349Thu, 06 Apr 2023 19:08:15 +0000[Release] Tinker Edge T Mendel 5 Eagle V3.0.2https://tinker-board.asus.com/forum/index.php?/topic/14395-release-tinker-edge-t-mendel-5-eagle-v302/ Tinker Edge T Mendel 5 Eagle V3.0.2

Release Notes
1. Upgraded to Mendel 5.0 (eagle)
1.a. Upgraded U-Boot bootloader to v2019.04
1.b. Upgraded Vivante GPU drivers
1.c. Added support for new 2 GB and 4 GB SoM configurations
1.d. Separated /home with a partition layout change, so the Home directory is now preserved across system flashes
1.e. Moved all Mendel packages to a more stable APT repository
2. Supported RTL8814AU USB Wi-Fi dongle
3. Supported USB remote wakeup via keyboard/mouse connected to type C connector
4. Supported T230H display

SHA256:
a76f66f56dac7b6d6a65edfd3832f15c9addaf7c0532f88a5e33c4f53b0cfe84 (zip)

Download link: https://dlcdnets.asus.com/pub/ASUS/mb/Embedded_IPC/Tinker_Edge_T/Tinker_Edge_T-Mendel-Eagle-V3.0.2-20201015.zip

Others: https://tinker-board.asus.com/download-list.html

]]>14395Thu, 18 Feb 2021 09:52:20 +0000Mendel 5 (V3.0.7) update failshttps://tinker-board.asus.com/forum/index.php?/topic/15045-mendel-5-v307-update-fails/ Hello everybody,

I am still facing the issue, that the OS crashes once I have started sudo apt update or sudo apt-get update.

This is the terminal prompt: 

mendel@zippy-ibis:~$ sudo apt-get update
Get:1 file:/var/cache/mdt/packages ./ InRelease
Ign:1 file:/var/cache/mdt/packages ./ InRelease
Get:2 file:/opt/aiy/packages ./ InRelease
Ign:2 file:/opt/aiy/packages ./ InRelease
Get:3 file:/var/cache/mdt/packages ./ Release
Ign:3 file:/var/cache/mdt/packages ./ Release
Get:4 file:/opt/aiy/packages ./ Release
Ign:4 file:/opt/aiy/packages ./ Release
Get:5 file:/var/cache/mdt/packages ./ Packages
Ign:5 file:/var/cache/mdt/packages ./ Packages                                            
Get:6 file:/var/cache/mdt/packages ./ Translation-en                                      
Ign:6 file:/var/cache/mdt/packages ./ Translation-en                                            
Get:7 file:/opt/aiy/packages ./ Packages                                                        
Ign:7 file:/opt/aiy/packages ./ Packages                                                  
Get:8 file:/opt/aiy/packages ./ Translation-en                                            
Ign:8 file:/opt/aiy/packages ./ Translation-en                                                  
Get:5 file:/var/cache/mdt/packages ./ Packages                                                  
Ign:5 file:/var/cache/mdt/packages ./ Packages                                            
Get:6 file:/var/cache/mdt/packages ./ Translation-en                                      
Ign:6 file:/var/cache/mdt/packages ./ Translation-en                                            
Get:7 file:/opt/aiy/packages ./ Packages                                                        
Ign:7 file:/opt/aiy/packages ./ Packages                                                  
Get:8 file:/opt/aiy/packages ./ Translation-en                                            
Ign:8 file:/opt/aiy/packages ./ Translation-en                                                  
Get:5 file:/var/cache/mdt/packages ./ Packages                                                  
Ign:5 file:/var/cache/mdt/packages ./ Packages                                            
Get:6 file:/var/cache/mdt/packages ./ Translation-en                                      
Ign:6 file:/var/cache/mdt/packages ./ Translation-en                                            
Get:7 file:/opt/aiy/packages ./ Packages                                                        
Ign:7 file:/opt/aiy/packages ./ Packages                                                  
Get:8 file:/opt/aiy/packages ./ Translation-en                                            
Ign:8 file:/opt/aiy/packages ./ Translation-en                                                  
Get:5 file:/var/cache/mdt/packages ./ Packages                                                  
Ign:5 file:/var/cache/mdt/packages ./ Packages                                            
Get:6 file:/var/cache/mdt/packages ./ Translation-en                                      
Ign:6 file:/var/cache/mdt/packages ./ Translation-en                                            
Get:7 file:/opt/aiy/packages ./ Packages                                                        
Ign:7 file:/opt/aiy/packages ./ Packages                                                  
Get:8 file:/opt/aiy/packages ./ Translation-en                                            
Ign:8 file:/opt/aiy/packages ./ Translation-en                                                  
Get:5 file:/var/cache/mdt/packages ./ Packages                                                  
Ign:5 file:/var/cache/mdt/packages ./ Packages                                            
Get:6 file:/var/cache/mdt/packages ./ Translation-en                                      
Ign:6 file:/var/cache/mdt/packages ./ Translation-en                                            
Get:7 file:/opt/aiy/packages ./ Packages                                                        
Ign:7 file:/opt/aiy/packages ./ Packages                                                  
Get:8 file:/opt/aiy/packages ./ Translation-en                                            
Ign:8 file:/opt/aiy/packages ./ Translation-en                                                  
Get:5 file:/var/cache/mdt/packages ./ Packages                                                  
Ign:5 file:/var/cache/mdt/packages ./ Packages                                            
Get:6 file:/var/cache/mdt/packages ./ Translation-en                                      
Ign:6 file:/var/cache/mdt/packages ./ Translation-en                                            
Get:7 file:/opt/aiy/packages ./ Packages                                                        
Ign:7 file:/opt/aiy/packages ./ Packages                                                  
Get:8 file:/opt/aiy/packages ./ Translation-en                                            
Ign:8 file:/opt/aiy/packages ./ Translation-en                                                  
Get:5 file:/var/cache/mdt/packages ./ Packages                                                  
Get:6 file:/var/cache/mdt/packages ./ Translation-en                                      
Ign:6 file:/var/cache/mdt/packages ./ Translation-en                                            
Get:7 file:/opt/aiy/packages ./ Packages [110 kB]                                               
Get:8 file:/opt/aiy/packages ./ Translation-en                                                      
Ign:8 file:/opt/aiy/packages ./ Translation-en                           
0% [Connecting to mendel-linux.org] [Connecting to debian.map.fastly.net (2a04:4e42:62::644)]

As far as I could find out, this issue is either related to IPv6 or to package sources fastly needs. Has anyone faced the same problem and knows how to overcome this behaviour? Thank you in advance.

Best regards
Thomas

]]>15045Mon, 10 Jan 2022 13:48:27 +0000Could not find a misc partitionhttps://tinker-board.asus.com/forum/index.php?/topic/15278-could-not-find-a-misc-partition/ Hi,

Trying to reflash my Tinker Edge T - but running into a problem when running "sudo reboot-bootloader." It occurs at step 4 in the below steps to reflash.

1. Flash the sdcard_arm64.img file to your microSD card with a program such as balenaEtcher.

2. Change the boot mode switches to boot from SD card. (ON: Switch 1/Switch 3/Switch 4; OFF: Switch 2)

3. Insert the SD card and then power on the board and the board should auto boot.

4. Please launch weston-terminal on the board and run sudo reboot-bootloader to reboot the board into the fastboot mode.    (Error at this step : Could not find a misc partition! Giving up. )

5. Run the flash.cmd script for Windows or flash.sh for Linux in this directory.

]]>15278Sat, 19 Nov 2022 14:47:50 +0000how to fixed error in mendel-manifesthttps://tinker-board.asus.com/forum/index.php?/topic/15231-how-to-fixed-error-in-mendel-manifest/  

https://github.com/TinkerEdgeT/mendel-manifest

$ repo init -u https://github.com/TinkerEdgeT/mendel-manifest.git -b mendel-eagle-imx_8m
$ repo sync

After downloading the development environment, run build/setup.sh Run build.sh
Check the following error message

-------------------------------------------------------------------------- build Message----------------------------------------------------------------------

./build.sh
VERSION_NUMBER:
========================================
ROOTDIR=/home/peterkwon/prj/tinkerBoard_T
OUT=/home/peterkwon/prj/tinkerBoard_T/out
PRODUCT_OUT=/home/peterkwon/prj/tinkerBoard_T/out/target/product/imx8m_phanbell
HOST_OUT=/home/peterkwon/prj/tinkerBoard_T/out/host/linux-x86
ROOT_OUT=/home/peterkwon/prj/tinkerBoard_T/out/root
========================================

Type m to build.
/home/peterkwon/prj/tinkerBoard_T/packages/uboot-imx/debian/overlays/hifiberry-dacplus-overlay.dts:32.5-18: Warning (reg_format): /fragment@2/__overlay__/pcm5122@4d:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
/home/peterkwon/prj/tinkerBoard_T/packages/uboot-imx/debian/overlays/hifiberry-dacplus-overlay.dtbo: Warning (pci_device_reg): Failed prerequisite 'reg_format'
/home/peterkwon/prj/tinkerBoard_T/packages/uboot-imx/debian/overlays/hifiberry-dacplus-overlay.dtbo: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
/home/peterkwon/prj/tinkerBoard_T/packages/uboot-imx/debian/overlays/hifiberry-dacplus-overlay.dtbo: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
/home/peterkwon/prj/tinkerBoard_T/packages/uboot-imx/debian/overlays/hifiberry-dacplus-overlay.dtbo: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
/home/peterkwon/prj/tinkerBoard_T/packages/uboot-imx/debian/overlays/hifiberry-dacplus-overlay.dtbo: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
/home/peterkwon/prj/tinkerBoard_T/packages/uboot-imx/debian/overlays/hifiberry-dacplus-overlay.dts:29.24-34.6: Warning (avoid_default_addr_size): /fragment@2/__overlay__/pcm5122@4d: Relying on default #address-cells value
/home/peterkwon/prj/tinkerBoard_T/packages/uboot-imx/debian/overlays/hifiberry-dacplus-overlay.dts:29.24-34.6: Warning (avoid_default_addr_size): /fragment@2/__overlay__/pcm5122@4d: Relying on default #size-cells value
/home/peterkwon/prj/tinkerBoard_T/packages/uboot-imx/debian/overlays/hifiberry-dacplus-overlay.dtbo: Warning (avoid_unnecessary_addr_size): Failed prerequisite 'avoid_default_addr_size'
/home/peterkwon/prj/tinkerBoard_T/packages/uboot-imx/debian/overlays/hifiberry-dacplus-overlay.dtbo: Warning (unique_unit_address): Failed prerequisite 'avoid_default_addr_size'
/home/peterkwon/prj/tinkerBoard_T/packages/uboot-imx/debian/overlays/waveshare_5inch_dsi.dts:10.12-12.6: Warning (unit_address_vs_reg): /fragment@0/__overlay__/panel@0: node has a unit name, but no reg property

*** GUI build selected -- set HEADLESS_BUILD=true if this is not what you intend.
*** Building packages locally, set FETCH_PACKAGES=true to use prebuilts
mkdir -p /home/peterkwon/prj/tinkerBoard_T/cache/docker-build
cp -a /home/peterkwon/prj/tinkerBoard_T/build /home/peterkwon/prj/tinkerBoard_T/cache/docker-build
cp -a /home/peterkwon/prj/tinkerBoard_T/board /home/peterkwon/prj/tinkerBoard_T/cache/docker-build
cp -a /home/peterkwon/prj/tinkerBoard_T/build/Dockerfile /home/peterkwon/prj/tinkerBoard_T/cache/docker-build
docker build -t aiy-board-builder /home/peterkwon/prj/tinkerBoard_T/cache/docker-build
[+] Building 7.6s (8/8) FINISHED
 => [internal] load build definition from Dockerfile                                                                                                                                      0.0s
 => => transferring dockerfile: 924B                                                                                                                                                      0.0s
 => [internal] load .dockerignore                                                                                                                                                         0.0s
 => => transferring context: 2B                                                                                                                                                           0.0s
 => [internal] load metadata for docker.io/library/debian:10.0                                                                                                                            1.0s
 => [1/4] FROM docker.io/library/debian:10.0@sha256:2f04d3d33b6027bb74ecc81397abe780649ec89f1a2af18d7022737d0482cefe                                                                      0.0s
 => [internal] load build context                                                                                                                                                         0.0s
 => => transferring context: 3.56kB                                                                                                                                                       0.0s
 => CACHED [2/4] ADD ./build /build                                                                                                                                                       0.0s
 => CACHED [3/4] ADD ./board /board                                                                                                                                                       0.0s
 => ERROR [4/4] RUN /bin/bash -c 'apt-get update && apt-get install -y sudo make && ln -sfr /build/Makefile /Makefile && source /build/setup.sh && make -C /build prereqs'                6.6s
------
 > [4/4] RUN /bin/bash -c 'apt-get update && apt-get install -y sudo make && ln -sfr /build/Makefile /Makefile && source /build/setup.sh && make -C /build prereqs':
#0 0.558 Get:1 http://security.debian.org/debian-security buster/updates InRelease [34.8 kB]
#0 0.694 Get:2 http://deb.debian.org/debian buster InRelease [122 kB]
#0 0.882 Get:3 http://deb.debian.org/debian buster-updates InRelease [56.6 kB]
#0 0.900 Get:4 http://security.debian.org/debian-security buster/updates/main amd64 Packages [357 kB]
#0 1.286 Get:5 http://deb.debian.org/debian buster/main amd64 Packages [7909 kB]
#0 2.154 Get:6 http://deb.debian.org/debian buster-updates/main amd64 Packages [8788 B]
#0 3.351 Fetched 8488 kB in 3s (3000 kB/s)
#0 3.351 Reading package lists...
#0 4.013 Reading package lists...
#0 4.659 Building dependency tree...
#0 4.769 Reading state information...
#0 4.873 The following additional packages will be installed:
#0 4.873   lsb-base
#0 4.873 Suggested packages:
#0 4.873   make-doc
#0 4.933 The following NEW packages will be installed:
#0 4.933   lsb-base make sudo
#0 5.159 0 upgraded, 3 newly installed, 0 to remove and 36 not upgraded.
#0 5.159 Need to get 1614 kB of archives.
#0 5.159 After this operation, 5259 kB of additional disk space will be used.
#0 5.159 Get:1 http://deb.debian.org/debian buster/main amd64 lsb-base all 10.2019051400 [28.4 kB]
#0 5.235 Get:2 http://deb.debian.org/debian buster/main amd64 make amd64 4.2.1-1.2 [341 kB]
#0 5.400 Get:3 http://deb.debian.org/debian buster/main amd64 sudo amd64 1.8.27-1+deb10u3 [1244 kB]
#0 5.789 debconf: delaying package configuration, since apt-utils is not installed
#0 5.823 Fetched 1614 kB in 1s (2443 kB/s)
#0 5.851 Selecting previously unselected package lsb-base.
(Reading database ... 6674 files and directories currently installed.)
#0 5.863 Preparing to unpack .../lsb-base_10.2019051400_all.deb ...
#0 5.868 Unpacking lsb-base (10.2019051400) ...
#0 5.924 Selecting previously unselected package make.
#0 5.925 Preparing to unpack .../make_4.2.1-1.2_amd64.deb ...
#0 5.929 Unpacking make (4.2.1-1.2) ...
#0 6.049 Selecting previously unselected package sudo.
#0 6.050 Preparing to unpack .../sudo_1.8.27-1+deb10u3_amd64.deb ...
#0 6.058 Unpacking sudo (1.8.27-1+deb10u3) ...
#0 6.238 Setting up lsb-base (10.2019051400) ...
#0 6.252 Setting up make (4.2.1-1.2) ...
#0 6.267 Setting up sudo (1.8.27-1+deb10u3) ...
#0 6.337 invoke-rc.d: could not determine current runlevel
#0 6.346 invoke-rc.d: policy-rc.d denied execution of start.
#0 6.417 /build/setup.sh: line 57: git: command not found
#0 6.423 ========================================
#0 6.423 ROOTDIR=/
#0 6.423 OUT=//out
#0 6.423 PRODUCT_OUT=//out/target/product/imx8m_phanbell
#0 6.423 HOST_OUT=//out/host/linux-x86
#0 6.423 ROOT_OUT=//out/root
#0 6.423 ========================================
#0 6.423
#0 6.423 Type m to build.
#0 6.427 make: Entering directory '/build'
#0 6.441 make: Leaving directory '/build'
#0 6.441 Makefile:26: *** qemu-user-static is either not installed or not configured properly..  Stop.
------
Dockerfile:21
--------------------
  20 |     ADD ./board /board
  21 | >>> RUN /bin/bash -c '\
  22 | >>> apt-get update && \
  23 | >>> apt-get install -y sudo make && \
  24 | >>> ln -sfr /build/Makefile /Makefile && \
  25 | >>> source /build/setup.sh && \
  26 | >>> make -C /build prereqs'
  27 |
--------------------
error: failed to solve: process "/bin/sh -c /bin/bash -c 'apt-get update && apt-get install -y sudo make && ln -sfr /build/Makefile /Makefile && source /build/setup.sh && make -C /build prereqs'" did not complete successfully: exit code: 2
make: *** [/home/peterkwon/prj/tinkerBoard_T/build/docker.mk:32: /home/peterkwon/prj/tinkerBoard_T/cache/aiy-board-builder.tar] Error 1
/home/peterkwon/prj/tinkerBoard_T/packages/uboot-imx/debian/overlays/hifiberry-dacplus-overlay.dts:32.5-18: Warning (reg_format): /fragment@2/__overlay__/pcm5122@4d:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
/home/peterkwon/prj/tinkerBoard_T/packages/uboot-imx/debian/overlays/hifiberry-dacplus-overlay.dtbo: Warning (pci_device_reg): Failed prerequisite 'reg_format'
/home/peterkwon/prj/tinkerBoard_T/packages/uboot-imx/debian/overlays/hifiberry-dacplus-overlay.dtbo: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
/home/peterkwon/prj/tinkerBoard_T/packages/uboot-imx/debian/overlays/hifiberry-dacplus-overlay.dtbo: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
/home/peterkwon/prj/tinkerBoard_T/packages/uboot-imx/debian/overlays/hifiberry-dacplus-overlay.dtbo: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
/home/peterkwon/prj/tinkerBoard_T/packages/uboot-imx/debian/overlays/hifiberry-dacplus-overlay.dtbo: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
/home/peterkwon/prj/tinkerBoard_T/packages/uboot-imx/debian/overlays/hifiberry-dacplus-overlay.dts:29.24-34.6: Warning (avoid_default_addr_size): /fragment@2/__overlay__/pcm5122@4d: Relying on default #address-cells value
/home/peterkwon/prj/tinkerBoard_T/packages/uboot-imx/debian/overlays/hifiberry-dacplus-overlay.dts:29.24-34.6: Warning (avoid_default_addr_size): /fragment@2/__overlay__/pcm5122@4d: Relying on default #size-cells value
/home/peterkwon/prj/tinkerBoard_T/packages/uboot-imx/debian/overlays/hifiberry-dacplus-overlay.dtbo: Warning (avoid_unnecessary_addr_size): Failed prerequisite 'avoid_default_addr_size'
/home/peterkwon/prj/tinkerBoard_T/packages/uboot-imx/debian/overlays/hifiberry-dacplus-overlay.dtbo: Warning (unique_unit_address): Failed prerequisite 'avoid_default_addr_size'
/home/peterkwon/prj/tinkerBoard_T/packages/uboot-imx/debian/overlays/waveshare_5inch_dsi.dts:10.12-12.6: Warning (unit_address_vs_reg): /fragment@0/__overlay__/panel@0: node has a unit name, but no reg property

*** GUI build selected -- set HEADLESS_BUILD=true if this is not what you intend.
*** Building packages locally, set FETCH_PACKAGES=true to use prebuilts
mkdir -p /home/peterkwon/prj/tinkerBoard_T/cache/docker-build
cp -a /home/peterkwon/prj/tinkerBoard_T/build /home/peterkwon/prj/tinkerBoard_T/cache/docker-build
cp -a /home/peterkwon/prj/tinkerBoard_T/board /home/peterkwon/prj/tinkerBoard_T/cache/docker-build
cp -a /home/peterkwon/prj/tinkerBoard_T/build/Dockerfile /home/peterkwon/prj/tinkerBoard_T/cache/docker-build
docker build -t aiy-board-builder /home/peterkwon/prj/tinkerBoard_T/cache/docker-build
[+] Building 8.5s (8/8) FINISHED
 => [internal] load .dockerignore                                                                                                                                                         0.0s
 => => transferring context: 2B                                                                                                                                                           0.0s
 => [internal] load build definition from Dockerfile                                                                                                                                      0.0s
 => => transferring dockerfile: 924B                                                                                                                                                      0.0s
 => [internal] load metadata for docker.io/library/debian:10.0                                                                                                                            1.9s
 => [internal] load build context                                                                                                                                                         0.0s
 => => transferring context: 3.56kB                                                                                                                                                       0.0s
 => [1/4] FROM docker.io/library/debian:10.0@sha256:2f04d3d33b6027bb74ecc81397abe780649ec89f1a2af18d7022737d0482cefe                                                                      0.0s
 => CACHED [2/4] ADD ./build /build                                                                                                                                                       0.0s
 => CACHED [3/4] ADD ./board /board                                                                                                                                                       0.0s
 => ERROR [4/4] RUN /bin/bash -c 'apt-get update && apt-get install -y sudo make && ln -sfr /build/Makefile /Makefile && source /build/setup.sh && make -C /build prereqs'                6.5s
------
 > [4/4] RUN /bin/bash -c 'apt-get update && apt-get install -y sudo make && ln -sfr /build/Makefile /Makefile && source /build/setup.sh && make -C /build prereqs':
#0 0.520 Get:1 http://security.debian.org/debian-security buster/updates InRelease [34.8 kB]
#0 0.635 Get:2 http://deb.debian.org/debian buster InRelease [122 kB]
#0 0.824 Get:3 http://deb.debian.org/debian buster-updates InRelease [56.6 kB]
#0 0.857 Get:4 http://security.debian.org/debian-security buster/updates/main amd64 Packages [357 kB]
#0 1.239 Get:5 http://deb.debian.org/debian buster/main amd64 Packages [7909 kB]
#0 2.078 Get:6 http://deb.debian.org/debian buster-updates/main amd64 Packages [8788 B]
#0 3.277 Fetched 8488 kB in 3s (3041 kB/s)
#0 3.277 Reading package lists...
#0 3.953 Reading package lists...
#0 4.582 Building dependency tree...
#0 4.691 Reading state information...
#0 4.796 The following additional packages will be installed:
#0 4.796   lsb-base
#0 4.796 Suggested packages:
#0 4.796   make-doc
#0 4.854 The following NEW packages will be installed:
#0 4.854   lsb-base make sudo
#0 5.079 0 upgraded, 3 newly installed, 0 to remove and 36 not upgraded.
#0 5.079 Need to get 1614 kB of archives.
#0 5.079 After this operation, 5259 kB of additional disk space will be used.
#0 5.079 Get:1 http://deb.debian.org/debian buster/main amd64 lsb-base all 10.2019051400 [28.4 kB]
#0 5.156 Get:2 http://deb.debian.org/debian buster/main amd64 make amd64 4.2.1-1.2 [341 kB]
#0 5.324 Get:3 http://deb.debian.org/debian buster/main amd64 sudo amd64 1.8.27-1+deb10u3 [1244 kB]
#0 5.654 debconf: delaying package configuration, since apt-utils is not installed
#0 5.696 Fetched 1614 kB in 1s (2661 kB/s)
#0 5.736 Selecting previously unselected package lsb-base.
(Reading database ... 6674 files and directories currently installed.)
#0 5.749 Preparing to unpack .../lsb-base_10.2019051400_all.deb ...
#0 5.753 Unpacking lsb-base (10.2019051400) ...
#0 5.808 Selecting previously unselected package make.
#0 5.810 Preparing to unpack .../make_4.2.1-1.2_amd64.deb ...
#0 5.814 Unpacking make (4.2.1-1.2) ...
#0 5.936 Selecting previously unselected package sudo.
#0 5.938 Preparing to unpack .../sudo_1.8.27-1+deb10u3_amd64.deb ...
#0 5.946 Unpacking sudo (1.8.27-1+deb10u3) ...
#0 6.129 Setting up lsb-base (10.2019051400) ...
#0 6.143 Setting up make (4.2.1-1.2) ...
#0 6.157 Setting up sudo (1.8.27-1+deb10u3) ...
#0 6.226 invoke-rc.d: could not determine current runlevel
#0 6.233 invoke-rc.d: policy-rc.d denied execution of start.
#0 6.305 /build/setup.sh: line 57: git: command not found
#0 6.311 ========================================
#0 6.311 ROOTDIR=/
#0 6.311 OUT=//out
#0 6.311 PRODUCT_OUT=//out/target/product/imx8m_phanbell
#0 6.311 HOST_OUT=//out/host/linux-x86
#0 6.311 ROOT_OUT=//out/root
#0 6.311 ========================================
#0 6.311
#0 6.311 Type m to build.
#0 6.314 make: Entering directory '/build'
#0 6.328 Makefile:26: *** qemu-user-static is either not installed or not configured properly..  Stop.
#0 6.328 make: Leaving directory '/build'
------
Dockerfile:21
--------------------
  20 |     ADD ./board /board
  21 | >>> RUN /bin/bash -c '\
  22 | >>> apt-get update && \
  23 | >>> apt-get install -y sudo make && \
  24 | >>> ln -sfr /build/Makefile /Makefile && \
  25 | >>> source /build/setup.sh && \
  26 | >>> make -C /build prereqs'
  27 |
--------------------
error: failed to solve: process "/bin/sh -c /bin/bash -c 'apt-get update && apt-get install -y sudo make && ln -sfr /build/Makefile /Makefile && source /build/setup.sh && make -C /build prereqs'" did not complete successfully: exit code: 2
make: *** [/home/peterkwon/prj/tinkerBoard_T/build/docker.mk:32: /home/peterkwon/prj/tinkerBoard_T/cache/aiy-board-builder.tar] Error 1
/home/peterkwon/prj/tinkerBoard_T/packages/uboot-imx/debian/overlays/hifiberry-dacplus-overlay.dts:32.5-18: Warning (reg_format): /fragment@2/__overlay__/pcm5122@4d:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
/home/peterkwon/prj/tinkerBoard_T/packages/uboot-imx/debian/overlays/hifiberry-dacplus-overlay.dtbo: Warning (pci_device_reg): Failed prerequisite 'reg_format'
/home/peterkwon/prj/tinkerBoard_T/packages/uboot-imx/debian/overlays/hifiberry-dacplus-overlay.dtbo: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
/home/peterkwon/prj/tinkerBoard_T/packages/uboot-imx/debian/overlays/hifiberry-dacplus-overlay.dtbo: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
/home/peterkwon/prj/tinkerBoard_T/packages/uboot-imx/debian/overlays/hifiberry-dacplus-overlay.dtbo: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
/home/peterkwon/prj/tinkerBoard_T/packages/uboot-imx/debian/overlays/hifiberry-dacplus-overlay.dtbo: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
/home/peterkwon/prj/tinkerBoard_T/packages/uboot-imx/debian/overlays/hifiberry-dacplus-overlay.dts:29.24-34.6: Warning (avoid_default_addr_size): /fragment@2/__overlay__/pcm5122@4d: Relying on default #address-cells value
/home/peterkwon/prj/tinkerBoard_T/packages/uboot-imx/debian/overlays/hifiberry-dacplus-overlay.dts:29.24-34.6: Warning (avoid_default_addr_size): /fragment@2/__overlay__/pcm5122@4d: Relying on default #size-cells value
/home/peterkwon/prj/tinkerBoard_T/packages/uboot-imx/debian/overlays/hifiberry-dacplus-overlay.dtbo: Warning (avoid_unnecessary_addr_size): Failed prerequisite 'avoid_default_addr_size'
/home/peterkwon/prj/tinkerBoard_T/packages/uboot-imx/debian/overlays/hifiberry-dacplus-overlay.dtbo: Warning (unique_unit_address): Failed prerequisite 'avoid_default_addr_size'
/home/peterkwon/prj/tinkerBoard_T/packages/uboot-imx/debian/overlays/waveshare_5inch_dsi.dts:10.12-12.6: Warning (unit_address_vs_reg): /fragment@0/__overlay__/panel@0: node has a unit name, but no reg property

*** GUI build selected -- set HEADLESS_BUILD=true if this is not what you intend.
*** Building packages locally, set FETCH_PACKAGES=true to use prebuilts
mkdir -p /home/peterkwon/prj/tinkerBoard_T/cache/docker-build
cp -a /home/peterkwon/prj/tinkerBoard_T/build /home/peterkwon/prj/tinkerBoard_T/cache/docker-build
cp -a /home/peterkwon/prj/tinkerBoard_T/board /home/peterkwon/prj/tinkerBoard_T/cache/docker-build
cp -a /home/peterkwon/prj/tinkerBoard_T/build/Dockerfile /home/peterkwon/prj/tinkerBoard_T/cache/docker-build
docker build -t aiy-board-builder /home/peterkwon/prj/tinkerBoard_T/cache/docker-build
[+] Building 7.7s (8/8) FINISHED
 => [internal] load build definition from Dockerfile                                                                                                                                      0.0s
 => => transferring dockerfile: 924B                                                                                                                                                      0.0s
 => [internal] load .dockerignore                                                                                                                                                         0.0s
 => => transferring context: 2B                                                                                                                                                           0.0s
 => [internal] load metadata for docker.io/library/debian:10.0                                                                                                                            0.9s
 => [1/4] FROM docker.io/library/debian:10.0@sha256:2f04d3d33b6027bb74ecc81397abe780649ec89f1a2af18d7022737d0482cefe                                                                      0.0s
 => [internal] load build context                                                                                                                                                         0.0s
 => => transferring context: 3.56kB                                                                                                                                                       0.0s
 => CACHED [2/4] ADD ./build /build                                                                                                                                                       0.0s
 => CACHED [3/4] ADD ./board /board                                                                                                                                                       0.0s
 => ERROR [4/4] RUN /bin/bash -c 'apt-get update && apt-get install -y sudo make && ln -sfr /build/Makefile /Makefile && source /build/setup.sh && make -C /build prereqs'                6.7s
------
 > [4/4] RUN /bin/bash -c 'apt-get update && apt-get install -y sudo make && ln -sfr /build/Makefile /Makefile && source /build/setup.sh && make -C /build prereqs':
#0 0.573 Get:1 http://security.debian.org/debian-security buster/updates InRelease [34.8 kB]
#0 0.675 Get:2 http://deb.debian.org/debian buster InRelease [122 kB]
#0 0.877 Get:3 http://deb.debian.org/debian buster-updates InRelease [56.6 kB]
#0 0.917 Get:4 http://security.debian.org/debian-security buster/updates/main amd64 Packages [357 kB]
#0 1.307 Get:5 http://deb.debian.org/debian buster/main amd64 Packages [7909 kB]
#0 2.205 Get:6 http://deb.debian.org/debian buster-updates/main amd64 Packages [8788 B]
#0 3.397 Fetched 8488 kB in 3s (2946 kB/s)
#0 3.397 Reading package lists...
#0 4.089 Reading package lists...
#0 4.705 Building dependency tree...
#0 4.812 Reading state information...
#0 4.917 The following additional packages will be installed:
#0 4.917   lsb-base
#0 4.917 Suggested packages:
#0 4.917   make-doc
#0 4.976 The following NEW packages will be installed:
#0 4.976   lsb-base make sudo
#0 5.169 0 upgraded, 3 newly installed, 0 to remove and 36 not upgraded.
#0 5.169 Need to get 1614 kB of archives.
#0 5.169 After this operation, 5259 kB of additional disk space will be used.
#0 5.169 Get:1 http://deb.debian.org/debian buster/main amd64 lsb-base all 10.2019051400 [28.4 kB]
#0 5.244 Get:2 http://deb.debian.org/debian buster/main amd64 make amd64 4.2.1-1.2 [341 kB]
#0 5.405 Get:3 http://deb.debian.org/debian buster/main amd64 sudo amd64 1.8.27-1+deb10u3 [1244 kB]
#0 5.795 debconf: delaying package configuration, since apt-utils is not installed
#0 5.835 Fetched 1614 kB in 1s (2576 kB/s)
#0 5.871 Selecting previously unselected package lsb-base.
(Reading database ... 6674 files and directories currently installed.)
#0 5.883 Preparing to unpack .../lsb-base_10.2019051400_all.deb ...
#0 5.887 Unpacking lsb-base (10.2019051400) ...
#0 5.943 Selecting previously unselected package make.
#0 5.945 Preparing to unpack .../make_4.2.1-1.2_amd64.deb ...
#0 5.950 Unpacking make (4.2.1-1.2) ...
#0 6.076 Selecting previously unselected package sudo.
#0 6.077 Preparing to unpack .../sudo_1.8.27-1+deb10u3_amd64.deb ...
#0 6.084 Unpacking sudo (1.8.27-1+deb10u3) ...
#0 6.283 Setting up lsb-base (10.2019051400) ...
#0 6.297 Setting up make (4.2.1-1.2) ...
#0 6.310 Setting up sudo (1.8.27-1+deb10u3) ...
#0 6.377 invoke-rc.d: could not determine current runlevel
#0 6.386 invoke-rc.d: policy-rc.d denied execution of start.
#0 6.459 /build/setup.sh: line 57: git: command not found
#0 6.465 ========================================
#0 6.465 ROOTDIR=/
#0 6.465 OUT=//out
#0 6.465 PRODUCT_OUT=//out/target/product/imx8m_phanbell
#0 6.465 HOST_OUT=//out/host/linux-x86
#0 6.465 ROOT_OUT=//out/root
#0 6.465 ========================================
#0 6.465
#0 6.465 Type m to build.
#0 6.468 make: Entering directory '/build'
#0 6.483 make: Leaving directory '/build'
#0 6.483 Makefile:26: *** qemu-user-static is either not installed or not configured properly..  Stop.
------
Dockerfile:21
--------------------
  20 |     ADD ./board /board
  21 | >>> RUN /bin/bash -c '\
  22 | >>> apt-get update && \
  23 | >>> apt-get install -y sudo make && \
  24 | >>> ln -sfr /build/Makefile /Makefile && \
  25 | >>> source /build/setup.sh && \
  26 | >>> make -C /build prereqs'
  27 |
--------------------
error: failed to solve: process "/bin/sh -c /bin/bash -c 'apt-get update && apt-get install -y sudo make && ln -sfr /build/Makefile /Makefile && source /build/setup.sh && make -C /build prereqs'" did not complete successfully: exit code: 2
make: *** [/home/peterkwon/prj/tinkerBoard_T/build/docker.mk:32: /home/peterkwon/prj/tinkerBoard_T/cache/aiy-board-builder.tar] Error 1

-------------------------------------------------------------------------- build Message End ----------------------------------------------------------------------

 

I want to know how to fix the error.

 

Regard.

]]>15231Mon, 19 Sep 2022 05:04:55 +0000Kernel Build Questions in Tinker Edge Thttps://tinker-board.asus.com/forum/index.php?/topic/15230-kernel-build-questions-in-tinker-edge-t/ Kernel Build Questions in Tinker Edge T

I installed Mendel 5 Eagle V3.0.2 on Tinker Edge T.

I want to change Boot Logo of Tinker Edge T, and I want to communicate with UART device in Mendel Linux.

To change the Boot Logo, Kernel must be compiled. Where can I download the kernel source for Mendel 5 Eagle V3.0.2?
And, what do I need to do to communicate with the UART device in mendel linux? Guid documentation says /dev/ttymxc0 and /dev/ttymxc2 should exist, but I see /dev/ttymxc0 and /dev/ttymxc1. If /dev/ttymxc1 is checked, it is said to be incorrect.

I need help with the above two.

regards.

]]>15230Mon, 19 Sep 2022 01:16:29 +0000Boot the ThinkOS from SD Card instead of eMMChttps://tinker-board.asus.com/forum/index.php?/topic/14846-boot-the-thinkos-from-sd-card-instead-of-emmc/ May I know how can i boot the Think OS by using SD Card instead of eMMC

]]>14846Wed, 21 Apr 2021 09:09:30 +0000How to put the system through an SD card?https://tinker-board.asus.com/forum/index.php?/topic/15207-how-to-put-the-system-through-an-sd-card/ Once, instead of issuing rights for a folder, I banned sudo and after several unsuccessful attempts to restore sudo, I was finally disappointed. Now the system without SD card does not work at all (Runs with SD card). Is there any way to install the system?

]]>15207Mon, 29 Aug 2022 10:17:27 +0000Passwort roothttps://tinker-board.asus.com/forum/index.php?/topic/15204-passwort-root/ I installed Tinker_Edge_T-Mendel-Eagle-V3.0.7-20210610. When running sudo nano I get an error >>> /etc/sudoers: syntax error near line 28 <<<.
Does anyone know root's password? (I've already tried 'mendel', that's not it!)

]]>15204Mon, 22 Aug 2022 16:08:40 +0000Cannot change keyboard-layouthttps://tinker-board.asus.com/forum/index.php?/topic/15194-cannot-change-keyboard-layout/ I tried to change the keyboard-layout to German as described in Getting Started, but nothing changed after rebooting the board. The keyboard remains set to QWERTY, although when I run dpkg-reconfigure keyboard-configuration again, it remembers the German settings from the previous session.

Is there something else I can do about this, or should I report it as a bug over at Mendel-Linux?

]]>15194Sat, 30 Jul 2022 12:01:39 +0000how to change Booting logo in Tinker Edge T Boardhttps://tinker-board.asus.com/forum/index.php?/topic/15198-how-to-change-booting-logo-in-tinker-edge-t-board/ Hi guys

I want to know how to change the Booting Logo of Tinker Edge T.
Please tell me how to change u-boot's booting logo and kernel's booting logo.

 

]]>15198Mon, 08 Aug 2022 12:02:36 +0000how to use UART Communicationhttps://tinker-board.asus.com/forum/index.php?/topic/15179-how-to-use-uart-communication/ Hello guys!

UART communication is attempted.
If you look at the GetStart document, ttymxc0 and ttymxc2 should be in the Uart list, but ttymxc0 and ttymxc1 appear in my Edge T device.
So, all UART Opens fail.

What prerequisites should be done for UART communication?

Thank.

]]>15179Thu, 14 Jul 2022 04:12:13 +0000Porting Window IoT Enterprise OS in Tinker Edge Thttps://tinker-board.asus.com/forum/index.php?/topic/15172-porting-window-iot-enterprise-os-in-tinker-edge-t/ Dear technical team,

May i know is Tinker Edge T (iMX8M SoC) can install with Window IoT Enterprise OS? If yes, where can i download the image? 

Best regards,

Choon Hwa

]]>15172Wed, 06 Jul 2022 06:16:07 +0000how to install libedgetpu for C languagehttps://tinker-board.asus.com/forum/index.php?/topic/15169-how-to-install-libedgetpu-for-c-language/ Hi guys.

I want to know how to install libedgetpu library.
I'm trying to make inferences using C language, but I can't find edgetpu.h or edgetpu_c.h. So, I want to know how to install libedgetpu for C/C++ language.

 

regards.

 

]]>15169Mon, 04 Jul 2022 06:00:33 +0000Disabling i2chttps://tinker-board.asus.com/forum/index.php?/topic/15011-disabling-i2c/ Hi everyone.

I was using TinkerBoard S boards for a project, but now that we can't get those anywhere, I started looking for other solutions.

I didn't want to use anything that didn't have an EMMC, so I went the Tinker Edge T route while waiting for the S2 to come out.

I can get pretty much everything I need working, but I can't seem to be able to disable the i2c bus at all. I need to disable it to be able to use at least 25 GPIO.

I tried the /boot/config.txt route, but not only are i2c busses not listed originally, adding them manually (with intf:i2c2=off) doesn't disable them at all. Moreover, there doesn't seem to be any linux kernel loaded for it.

I am using the Tinker Edge T with Mendel Eagle 3.0.7.

Any way for me to disable i2c ?

Thank you !

]]>15011Tue, 02 Nov 2021 06:59:16 +0000Debian/ubuntu OS running in Tinker Edge Thttps://tinker-board.asus.com/forum/index.php?/topic/14845-debianubuntu-os-running-in-tinker-edge-t/ May i know how can I boot the OS from SD Card where the SD card is flashed with Debian OS or Ubuntu OS?

]]>14845Wed, 21 Apr 2021 09:04:00 +0000[Release] Tinker Edge T Mendel 4 Day V2.0.2https://tinker-board.asus.com/forum/index.php?/topic/23-release-tinker-edge-t-mendel-4-day-v202/ Tinker Edge T Mendel 4 Day V2.0.2

Release Notes
1. First release based on Debian 10 (buster) (Note that our distribution does not include everything from Debian; for example, Mendel does not include desktop environments and applications, because our system is designed for embedded systems. Also, the new SecureBoot and AppArmor changes do not apply to Mendel)
2. Support for Python 3.7
3. Support for OpenCV and OpenCL
4. Support for device tree overlays
5. Upgraded GStreamer pipelines
6. Upgraded Linux Kernel (4.14)
7. Upgraded U-Boot bootloader (2017.03.3)
8. Support BenQ RL2455HM display
9. Support USB remote wakeup

SHA256:
e0c5b8ea8d00d83b42c0d4e7cd5450c744bf47a1c26a4210dcba2afe6d01579b (zip)

Download link:

https://dlcdnets.asus.com/pub/ASUS/mb/Embedded_IPC/Tinker_Edge_T/Tinker_Edge_T-Mendel-Day-V2.0.2-20200701.zip

]]>23Mon, 21 Sep 2020 07:10:05 +0000