Jump to content
New Wiki - User & Developer Guide ×

tooz

Tinker Engineer
 View Profile  See their activity

  • Content Count

    638

  • Joined

  • Last visited

  • Days Won

    44

Posts posted by tooz

  3. Posted

    hello @EdwardKhoh 

    for Tinker Board/ Tinker Board S, please refer to this page: https://tinkerboarding.co.uk/wiki/index.php/Setup#Setting_up_your_SD_card 

    1. if you're using a Tinker Edge T, please unzip the image file downloaded from https://tinker-board.asus.com/download-list.html?product=tinker-edge-t 
    2. there will be an .img file named "sdcard_arm64" in the folder. you can use either Win32DiskImager or balenaEtcher to flash your SD card with this .img file
    3. if you flip the board, there are 4 switches on the back of Tinker Edge T, please switch it to "ON, OFF, ON, ON" so the board is enabled booting from SD card

    please note that you will have to put the switch back to "ON, OFF, OFF, OFF" if you wish to boot from eMMC
     

  8. Posted

    Hey Pilot, could you let us know a little more so we can troubleshoot quicker?

    It would be great to know:

    1. the OS version --  you can use the command line cat /etc/version in the terminal to check the version 

    2. is the monitor connected to Tinker Edge R with a HDMI cable? or is it plugged in a different port?

    3. does the flickering always occur, or it only happens when the board/ monitor is doing specific tasks?

    4. when the flickering happened, have you tried to unplug and replug the cable? if so, did it help?

    5. would be great if you have the video clip when the flickering occurs so we can observe the issue

     

  9. Posted

    17 hours ago, Mauricio Lucas said:

     

    Hello, I try to run the lib mfrc522 python (for RFID reader), but it's just the Raspberry card. I changed the lib to use Asus.GPIO, but it doesn't work with spiV2.

    Does the Asus tinker have any libs or modifications that I can use with the RFID-RC522 reader?

    Hello @Mauricio Lucas

    could you tell us how you set up the device? perhaps we can troubleshoot by going through your steps/ error logs, thank you.

  10. Posted

    6 hours ago, Hoshino said:

    I could not start Tinker Edge R. 

    Flushing Failed.

    What should I do?

    Hello Hoshino, 

    is there any error logs? could you describe how you flash the board?

    also, related information can be found at:

    Documentation > Tinker Edge R > Getting Started > Flashing the Tinker Edge R https://tinker-board.asus.com/doc_er.html#started

    ROM image can be downloaded here: https://tinker-board.asus.com/download-list.html

    hope it helps!

     

×
×
  • Create New...