Jump to content

ken

Members
  • Content Count

    12
  • Joined

  • Last visited

Posts posted by ken


  1. I am trying to interface as I need up to 6 serial ports.

    In the case of RaspberryPi, there is a product that can use up to 32 by creating two serial ports using the SC16IS752 using I2C and adding addresses.

    I'm trying to apply this to Tinker Board2, but there are problems with the driver, etc.

    Could you please give me some reference information?

    Have a good day.


  2. The environmental temperature is around 25 to 30 degrees and a heat sink is attached.

    If the CPU temperature is overheated, will it automatically reboot?
    Or does it shut down?

    When the system is stopped, only the power LED  on and the LAN port lamps all remain OFF.

    There are 240 identical systems in operation, but only an unspecified unit has occasional problems. (4 ~ 5EA)


  3. Hello @tooz,

    In 4.4.194 , I changed the kernel module to a module and built it.

    $ sudo dd if=boot.img of=/dev/sdd4 status=progress && sync
    $ sudo reboot

    No Change Kernel.

    Not Found sdd4

    Plese Help Me.

    image.png


  4. Use TinkerBoard2

    In order to disable Built In driver, I changed it to [M] in Config and made it. (CH341 / PL2303)

    sudo make ARCH=arm64 tinker2_defconfig   <- OK

    sudo make ARCH=arm64 menuconfig   <- CH341 / PL2303 Driver [M] Change
    sudo make ARCH=arm64 rk3399-tinker_board_2.img -j24  <- OK
    sudo make ARCH=arm64 install   <-- Fail

    /root   cat: write error: No space left o device  

    I searched and found that sudo dd if=boot.img of=/dev/mmcblk1p4

    df command 

    /dev/mmcblk0p8   - /root

    sudo dd if=boot.img of=/dev/mmcblk0p8  

    Reboot ... but Not Change Kernel

    Retry Install Command Run

    sudo make ARCH=arm64 install 

    .....

    /bin/bash ./arch/arm64/boot/install.sh 4.4.194 \
    arch/arm64/boot/Image System.map "/boot"
    run-parts: executing /etc/kernel/postinst.d/apt-auto-removal 4.4.194 /boot/vmlinuz-4.4.194
    run-parts: executing /etc/kernel/postinst.d/initramfs-tools 4.4.194 /boot/vmlinuz-4.4.194
    update-initramfs: Generating /boot/initrd.img-4.4.194
    find: ‘/var/tmp/mkinitramfs_oURVYA/lib/modules/4.4.194/kernel’: No such file or directory
    run-parts: executing /etc/kernel/postinst.d/pm-utils 4.4.194 /boot/vmlinuz-4.4.194

    Reboot ... but Not Change Kernel

    Please help me.


     

     


     


  5. PL2303 Usb To Serial Use TinkerBoard2

    USB port nn disabled by hub (EMI?), re-enabling

    It is not recognized automatically after an error occurs.

    dmesg Message

    [   10.052654] usb 5-1.1: Device not responding to setup address.
    [   10.263675] usb 5-1.1: device not accepting address 6, error -71
    [   10.300419] usb 5-1-port1: unable to enumerate USB device

    But Power OFF -> ON  It is recognized normally.

    FTDI Usb To Serial Use TinkerBoard2  - It is automatically recognized again after EMI Error occurs.

    PL2303 Driver Kernel Bug?

     

×
×
  • Create New...