Jump to content
Omirax

CH341 is not set

Recommended Posts

Hello!

/proc/config.gz

# CONFIG_USB_SERIAL_CH341 is not set

Why and HOW?

It's very important for me!

Kernel 4.4.194 and I can't install headers (not found) for make driver...

Please help!

Share this post


Link to post
Share on other sites

Hello Frank3_Wu!

Can I use this img for Asus Tinker R? 

I flashed the SD card, inserted it into the slot, but my Tinker R won't start ...

I have not yet decided to flash EMMC

Edited by Omirax

Share this post


Link to post
Share on other sites

One more:

linaro@linaro-alip:~/work/ch340/CH341SER$ sudo modprobe usbserial
modprobe: ERROR: ../libkmod/libkmod.c:586 kmod_search_moddep() could not open moddep file '/lib/modules/4.4.194/modules.dep.bin'
modprobe: FATAL: Module usbserial not found in directory /lib/modules/4.4.194

How fixed this?

Share this post


Link to post
Share on other sites
18 hours ago, Omirax said:

Hello Frank3_Wu!

Can I use this img for Asus Tinker R? 

I flashed the SD card, inserted it into the slot, but my Tinker R won't start ...

I have not yet decided to flash EMMC

No, is different kernel source. For Tinker Edge R please use this: https://github.com/TinkerEdgeR/debian-kernel

Or you means Tinker R/BR? for Tinker R/BR or Tinker S/BR, please reference Tinker Board or Tinker Board S. And kernel source here: https://github.com/TinkerBoard/debian_kernel

Share this post


Link to post
Share on other sites

Hello!

So sorry.
We use Asus Tinker Edge R, so I am posting in the forum section for Tinker Edge R.
And I was surprised when you wrote that we can use the image from Tinker 2S.
Ok. Now we have only one problem for start tests our project.

# CONFIG_USB_SERIAL_CH341 is not set 

 

Share this post


Link to post
Share on other sites

Hi Omirax:

  • [Execution environment -- Ubuntu 18.04]

1).  Kernel Code => git clone https://github.com/TinkerEdgeR/debian-kernel.git
2).  GCC  =>  wget http://releases.linaro.org/components/toolchain/binaries/6.3-2017.05/aarch64-linux-gnu/gcc-linaro-6.3.1-2017.05-x86_64_aarch64-linux-gnu.tar.xz
3).  cd debian-kernel
4).  make ARCH=arm64 tinker_edge_r_defconfig CROSS_COMPILE=/media/edger/gcc-linaro-6.3.1-2017.05-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu- -j32
5).  make ARCH=arm64 tinker_edge_r.img CROSS_COMPILE=/media/edger/gcc-linaro-6.3.1-2017.05-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu- -j32

  • [Execution environment -- EdgeR]

6).  compile finish,copy [Ubuntu src] --> debian-kernel/boot.img to EdgeR
7).  dd if=boot.img of=/dev/mmcblk1p4
8).  sudo reboot

Thanks. 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...