Al Avitr 0 Posted September 22, 2022 Hello! Exciting to be using the Tinker Board 2S! My application requires Android 11 with an external touch screen display. The issue I am facing is that the touch screen input to Tinker board 2S via the USB does not work. Touch input is not detected. The same setup works fine on a Blackberry Pi 4 running Emteria Android. So, I have concluded that it must be some issue/setting on the Android 11 running on the Tinker Board 2S. FYI, a wireless mouse/keyboard work just fine on 2S. Anyone with experience using an external touch screen monitor via USB? Thanks! Share this post Link to post Share on other sites
jravi24 0 Posted January 1, 2023 I am facing the same problem with my ASUS Tinkerboard 2S. My observations so far: Touch interface through USB doesnt work. If I connect keyboard/mouse BEFORE the touch usb, keyboard/mouse work. Once I connect the touch USB, nothing works. Any help with this problem would be great. Thank you Share this post Link to post Share on other sites
tooz 47 Posted January 3, 2023 hello @Al Avitr / @jravi24, what are the touchscreens you're using? is it possible for you to get the syslogs? Share this post Link to post Share on other sites