ChristopherB 0 Posted February 11 Hello, I am new in Asus arena, I am testing an tinker3s board. I have much more experience in Rpi, ESP32, Arduino, microcontrolers, STM32 ... I would like to harden an Tinker3s like I do with other boards. I succeed to download debian 11 on SDCard and eMMC. update and upgrade have been performed. ----------------------------------------------------------------------------------------- hostnamectl Static hostname: xxxxxxxxxxx Icon name: computer Machine ID: 455600600d8c4f4fd26c8dbc67221164 Boot ID: f4a9d2397ba347a8a7030b8c89e54df4 Operating System: Debian GNU/Linux 11 (bullseye) Kernel: Linux 5.10.209 Architecture: arm64 ----------------------------------------------------------------------------------------- Looking at the forum I did not found expected informations, here are few questions : Is there some online command to be used to prevent from using GUI tinker-config tool ? Is it possible to download light OS with NO desktop ? How should be configured resolv.conf file ? Is it updated at each board reboot ? How should be set DNS configuration ? How should be set NTP configuration ? set-ntp does not work like if config files are missing. I set date & time manually. How should be configured wire network (configuration file and interfaces) ? Where is located the default wired network configuration file and associates certificates ? How should be configured ROOTCA, IntermediateCA and user certificates used for enterprise wifi vlan connexion ? (I set wpa_supplicant and certificates with no sucessfull connexion) Thanks in advance for your help Share this post Link to post Share on other sites
