Tinker Board 2S do not boot after install uboot-tinkerboard2

[Krz62c 0]

Hello,

After making: install uboot-tinkerboard2 the card do not start. I have connected uart debug port and I always read: DDR Version 1.24 20191016

nothing more in the debug.

So I can not restart the board, MaskRom is working but I don't know what to do .

Is there a solution ?

 

[tooz 54]

hello @Krz62c, 

1 hour ago, Krz62c said:

uboot-tinkerboard2

what's the source of this file? where did it come from?

[Krz62c 0]

Hello,

it comes from : Tinker Board 2 & 2S · TinkerBoard/TinkerBoard Wiki · GitHub

this is what I have done: ( it's written in that wiki)

1.On the Tinker Board 2S Debian system, edit the source.list file to add the PPA URL for
Tinker Board 2S as the following
sudo vim /etc/apt/sources.list
deb http://ppa.launchpad.net/asus-iot/test-tb2/ubuntu focal main
2.Using the following commands to update and install the general version. It will install
the latest tinkerboard2S kernel image and headers
sudo apt-get update
sudo apt install uboot-tinkerboard2
sudo apt-get install linux-headers-5.10.198-tinkerboard2
sudo apt-get install linux-image-5.10.198-tinkerboard2
sudo reboot

And so after reboot nothing start.

 

[tooz 54]

hello @Krz62c, 

are you using v.3.0.20

Tinker Board 2 /2S Debian 11 (kernel 5.10) v.3.0.20

as os image?

[Krz62c 0]

Hello,

exactly, this is Tinker OS Debian 11 Bullseye kernel 5.10 v3.0.20  20240527 release