sachlj
-
Content Count
11 -
Joined
-
Last visited
Posts posted by sachlj
-
-
How to fix (set to repair mode) if it can't be flashed?
-
Boot to MMC not work. Install RPi 4 --> Asus tinker T.
Boot mode ON, OFF,OFF,OFF. The whole video is waiting for something to happen.
Where is the mistake?
-
RPi i2c 3,3v
arduino i2c 5V
Tinker Edge T i2c ?? V
-
When the creators of Tinker Edge T could no longer use hundreds of cameras for RPi then they could at least create a list of cameras to connect to Tinker Edge T. Could they put this list here?
-
I managed to flash the version of Tinker Edge T Mendel 5.2 Eagle V3.0.7 using RPi4. It was necessary to install flashboot and run the flash.sh script with root privileges. The system boot is slow, the OS is looking for a connected display and both cameras. Searching for everyone takes 2 minutes. Very poorly prepared installation. That doesn't happen with Raspberry.
-
Raspberry 4:
Tinker_Edge_T-Mendel-Eagle-V3.0.2-20201015 $ sudo ./flash.sh
Existing home partition detected, will not flash home (override with -H)
target reported max download size of 419430400 bytes
sending 'bootloader0' (1130 KB)...
OKAY [ 0.073s]
writing 'bootloader0'...
OKAY [ 0.137s]
finished. total time: 0.210s
rebooting into bootloader...
OKAY [ 0.018s]
finished. total time: 0.319s
target reported max download size of 419430400 bytes
sending 'gpt' (33 KB)...
OKAY [ 0.019s]
writing 'gpt'...
OKAY [ 0.223s]
finished. total time: 0.243s
rebooting into bootloader...
OKAY [ 0.016s]
finished. total time: 0.166s
erasing 'misc'...
OKAY [ 0.031s]
finished. total time: 0.031s
target reported max download size of 419430400 bytes
sending 'boot' (131072 KB)...
OKAY [ 5.082s]
writing 'boot'...
OKAY [ 2.881s]
finished. total time: 7.964s
error: cannot load './rootfs_arm64.img': Value too large for defined data type
Failed to execute '/usr/bin/fastboot flash rootfs ./rootfs_arm64.img'?????????????????????????????????????
-
Is it necessary to install any drivers to install MENDEL OS from RPi with Raspbian? 3 computers with Windows 10 and Tinker Borard failed to boot. The drivers failed to install even via the Windows 10 update.
-
Where is the USB driver for Windows 10 64bit? Usb driver for Windows XP? Does anyone use it?
-
Thank you for answer. Is OS "Tinker_Edge_T-Mendel-Eagle-V3.0.7-20210610" the full version OS or is it just an upgrade version of "Tinker_Edge_T-Mendel-Eagle-V3.0.2-20201015"?
-
Is openssh-server installed? What is the username and password?
Expand Filesystem
in General Discussion
Posted
I installed Tinker OS on a 16GB SD card. Which command do I use to do the Expand Filesystem as it is on the Raspberry Pi?