[Release] Tinker Edge R Debian 10 V2.0.5

[[Release] Tinker Edge R Debian 10 V2.0.5]

I have installed v2.0.5 image to Tinker Edge R, but Wifi is not available and Bluetooth returns to Off after reboot.  A few questions:

1. Should WiFi work out-the-box after imaging?

2.Do I need to download driver separately for Wifi?

 

Here are some logs:

# ifconfig

eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.1.189  netmask 255.255.255.0  broadcast 192.168.1.255
        inet6 fe80::87f:835f:43bf:81eb  prefixlen 64  scopeid 0x20<link>
        ether 24:4b:fe:56:00:1f  txqueuelen 1000  (Ethernet)
        RX packets 4950  bytes 4665354 (4.4 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 2300  bytes 438743 (428.4 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
        device interrupt 24  

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1  (Local Loopback)
        RX packets 16  bytes 1072 (1.0 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 16  bytes 1072 (1.0 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

# nmcli con show
NAME                UUID                                  TYPE      DEVICE 
Wired connection 1  aexxx166-xxx-34d5-xxxx-ec2xxxx6829a  ethernet  eth0   

---------------------------------------

# lsmod
Module                  Size  Used by
bcmdhd               1228800  0
 

Thanks in advance.