I have installed v2.0.5 image to Tinker Edge R, but Wifi is not available and Bluetooth returns to Off after reboot. A few questions:
1. Should WiFi work out-the-box after imaging?
2.Do I need to download driver separately for Wifi?
Here are some logs:
# ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.189 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 fe80::87f:835f:43bf:81eb prefixlen 64 scopeid 0x20<link>
ether 24:4b:fe:56:00:1f txqueuelen 1000 (Ethernet)
RX packets 4950 bytes 4665354 (4.4 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 2300 bytes 438743 (428.4 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 24
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1 (Local Loopback)
RX packets 16 bytes 1072 (1.0 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 16 bytes 1072 (1.0 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
# nmcli con show
NAME UUID TYPE DEVICE
Wired connection 1 aexxx166-xxx-34d5-xxxx-ec2xxxx6829a ethernet eth0
---------------------------------------
# lsmod
Module Size Used by
bcmdhd 1228800 0
Thanks in advance.
