H.Suzuki

Hi @tooz I have tried the following command, but I got build error as attached unfortunately. make ARCH=arm tinker_board_defconfig make ARCH=arm deb-pkg -j24 After all, It's better to get linux-headers file which you built. Could you provide it to me? Part of error message is as follows. CC [M] drivers/net/wireless/rockchip_wlan/rtl8723ds/core/rtw_sta_mgt.o drivers/net/wireless/rockchip_wlan/rkwifi/bcmdhd/dhd_linux.c: In function 'dhd_ethtool': drivers/net/wireless/rockchip_wlan/rkwifi/bcmdhd/dhd_linux.c:6965:39: warning: argument to 'sizeof' in 'strncpy' call is the same expression as the source; did you mean to use the size of the destination? [-Wsizeof-pointer-memaccess] error, forbidden warning:dhd_linux.c:6965 strncpy(drvname, info.driver, sizeof(info.driver)); ^ make[8]: *** [scripts/Makefile.build:277: drivers/net/wireless/rockchip_wlan/rkwifi/bcmdhd/dhd_linux.o] Error 1 make[7]: *** [scripts/Makefile.build:484: drivers/net/wireless/rockchip_wlan/rkwifi/bcmdhd] Error 2 make[6]: *** [scripts/Makefile.build:484: drivers/net/wireless/rockchip_wlan/rkwifi] Error 2 make[6]: *** Waiting for unfinished jobs.... CC [M] drivers/net/wireless/rockchip_wlan/rtl8723ds/core/rtw_ap.o : : LD [M] drivers/net/wireless/rockchip_wlan/rtl8723ds/8723ds.o make[5]: *** [scripts/Makefile.build:484: drivers/net/wireless/rockchip_wlan] Error 2 make[4]: *** [scripts/Makefile.build:484: drivers/net/wireless] Error 2 make[3]: *** [scripts/Makefile.build:484: drivers/net] Error 2 make[2]: *** [Makefile:1036: drivers] Error 2 make[1]: *** [scripts/package/Makefile:92: deb-pkg] Error 2 make: *** [Makefile:1324: deb-pkg] Error 2 error.txt

Hi @tooz, Now, I know we have to use the following command with ARCH=arm parameter in my case. make ARCH=arm tinker_board_defconfig make ARCH=arm deb-pkg -j24

Hi tooz, I'm trying make headers file on my Tinker Board R2.0. What defconfig file should I use? If possible, could you provide headers file you made?

Hi tooz, Thank you for prompt reply. I tried to it, but the following error message appeared. It seems there is tinker_board_defconfig. linaro@linaro-alip:~/kernel-tinker_board-debian-3.0.11$ make tinker_board_defconfig *** *** Can't find default configuration "arch/arm64/configs/tinker_board_defconfig"! *** make[1]: *** [scripts/kconfig/Makefile:110: tinker_board_defconfig] Error 1 make: *** [Makefile:565: tinker_board_defconfig] Error 2 linaro@linaro-alip:~/kernel-tinker_board-debian-3.0.11$ ls arch/arm64/configs/ cuttlefish_defconfig rk1806_linux_defconfig rk3399pro_npu_defconfig defconfig rk1808_linux_defconfig rk3399pro_npu_pcie_defconfig lsk_defconfig rk1808_x4_linux_defconfig rockchip_cros_defconfig puma_defconfig rk3308_linux_defconfig rockchip_defconfig px30_linux_defconfig rk3308_robot_defconfig rockchip_linux_bifrost.config px30_linux_robot_defconfig rk3326_linux_defconfig rockchip_linux_defconfig ranchu64_defconfig rk3326_linux_robot_defconfig

Could anyone share how apply the overlayroot on the Tinker Debian? I need to protect SD card even if power interruption happens unexpectedly during running linux. In my previous project which uses Raspberry Pi 3, enable_overlayfs is applied by using raspi-config. I need such function on the tinker board too. Thanks,

I'm using "Tinker Board Debian 10 V3.0.11" on tinker board r2.0. Could anyone inform where can I get linux-headers file? Thanks,