MarciS

Hell @tooz, to download I used $ repo init -u https://github.com/TinkerBoard2-Android/manifest.git -b android11-rk3399 -m tinker_board_2-android11-2.0.1.xml $ repo sync and to build I used the these instruction from 2.1 Build image source build/envsetup.sh lunch WW_Tinker_Board_2-userdebug ./build.sh -UKAu Note that I removed the option C build kernel with Clang because it was failing and I wasn't able to fix it.

@Ponnu where you able to run it on an emulator? If yes could you tell how?

Hello, thank you for the feedback. The link was very useful, nevertheless I had some issues when building u-boot and the kernel (for the moment I tests these). For u-boot I get Error: arch/arm/dts/.rk3036-sdk.dtb.pre.tmp:77.1-10 syntax error FATAL ERROR: Unable to parse input tree make[2]: *** [scripts/Makefile.lib:319: arch/arm/dts/rk3036-sdk.dtb] Error 1 make[2]: *** Waiting for unfinished jobs.... Error: arch/arm/dts/.rk3368-px5-evb.dtb.pre.tmp:335.1-10 syntax error FATAL ERROR: Unable to parse input tree make[2]: *** [scripts/Makefile.lib:319: arch/arm/dts/rk3368-px5-evb.dtb] Error 1 Error: arch/arm/dts/.rk3328-evb.dtb.pre.tmp:301.1-10 syntax error FATAL ERROR: Unable to parse input tree make[2]: *** [scripts/Makefile.lib:319: arch/arm/dts/rk3328-evb.dtb] Error 1 Error: arch/arm/dts/.rk3368-sheep.dtb.pre.tmp:288.1-10 syntax error FATAL ERROR: Unable to parse input tree make[2]: *** [scripts/Makefile.lib:319: arch/arm/dts/rk3368-sheep.dtb] Error 1 arch/arm/dts/rk3126-evb.dtb: Warning (reg_format): "reg" property in /syscon@20008000/usb2-phy@17c has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1) arch/arm/dts/rk3126-evb.dtb: Warning (avoid_default_addr_size): Relying on default #address-cells value for /syscon@20008000/usb2-phy@17c arch/arm/dts/rk3126-evb.dtb: Warning (avoid_default_addr_size): Relying on default #size-cells value for /syscon@20008000/usb2-phy@17c arch/arm/dts/rk3128-evb.dtb: Warning (reg_format): "reg" property in /syscon@20008000/usb2-phy@17c has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1) arch/arm/dts/rk3128-evb.dtb: Warning (avoid_default_addr_size): Relying on default #address-cells value for /syscon@20008000/usb2-phy@17c arch/arm/dts/rk3128-evb.dtb: Warning (avoid_default_addr_size): Relying on default #size-cells value for /syscon@20008000/usb2-phy@17c Error: arch/arm/dts/.rk3188-radxarock.dtb.pre.tmp:383.1-10 syntax error FATAL ERROR: Unable to parse input tree make[2]: *** [scripts/Makefile.lib:319: arch/arm/dts/rk3188-radxarock.dtb] Error 1 Error: arch/arm/dts/.rk3368-geekbox.dtb.pre.tmp:320.1-10 syntax error FATAL ERROR: Unable to parse input tree make[2]: *** [scripts/Makefile.lib:319: arch/arm/dts/rk3368-geekbox.dtb] Error 1 Error: arch/arm/dts/.rk3368-lion.dtb.pre.tmp:196.1-10 syntax error FATAL ERROR: Unable to parse input tree make[2]: *** [scripts/Makefile.lib:319: arch/arm/dts/rk3368-lion.dtb] Error 1 make[1]: *** [dts/Makefile:101: arch-dtbs] Error 2 make: *** [Makefile:882: dts/dt.dtb] Error 2 Build uboot failed! ms@c64416174e4e:/source$ ls u-boot/: I fixed it modifying the Makefile in /source/u-boot/arch/arm/dts so that only mk3399 is listed. New content of /source/u-boot/arch/arm/dts/Makefile ... dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3399-evb.dtb \ rk3399-firefly.dtb \ rk3399-puma-ddr1333.dtb \ rk3399-puma-ddr1600.dtb \ rk3399-puma-ddr1866.dtb dtb-$(CONFIG_ARCH_MESON) += \ ... This allowed me to discard all other board and build only for rk3399. @tooz Do you know if this may cause future issue or it can be accepted? About the kernel instead: I was never able to build the kernel with clang. I got the error: ms@92fa117c0cc6:/source$ ./build.sh -C will build kernel with Clang -------------------KERNEL_DTS:rk3399-tinker-board-2 Start build kernel CLEAN . CLEAN certs CLEAN drivers/scsi CLEAN fs/unicode CLEAN kernel CLEAN lib CLEAN net/wireless CLEAN security/selinux CLEAN usr CLEAN .tmp_versions #### build completed successfully (8 seconds) #### /bin/sh: 1: ../prebuilts/clang/host/linux-x86/clang-r383902b/bin/clang: not found HOSTCC scripts/basic/fixdep /bin/sh: 1: ../prebuilts/clang/host/linux-x86/clang-r383902b/bin/clang: not found HOSTCC scripts/kconfig/conf.o YACC scripts/kconfig/zconf.tab.c LEX scripts/kconfig/zconf.lex.c HOSTCC scripts/kconfig/zconf.tab.o HOSTLD scripts/kconfig/conf ./scripts/gcc-version.sh: 26: ../prebuilts/clang/host/linux-x86/clang-r383902b/bin/clang: not found ./scripts/gcc-version.sh: 27: ../prebuilts/clang/host/linux-x86/clang-r383902b/bin/clang: not found ./scripts/gcc-version.sh: 29: ../prebuilts/clang/host/linux-x86/clang-r383902b/bin/clang: not found ./scripts/gcc-version.sh: 26: ../prebuilts/clang/host/linux-x86/clang-r383902b/bin/clang: not found ./scripts/gcc-version.sh: 27: ../prebuilts/clang/host/linux-x86/clang-r383902b/bin/clang: not found ./scripts/gcc-version.sh: 29: ../prebuilts/clang/host/linux-x86/clang-r383902b/bin/clang: not found init/Kconfig:17: syntax error init/Kconfig:16: invalid option ./scripts/clang-version.sh: 15: ../prebuilts/clang/host/linux-x86/clang-r383902b/bin/clang: not found ./scripts/gcc-plugin.sh: 11: ../prebuilts/clang/host/linux-x86/clang-r383902b/bin/clang: not found make[2]: *** [scripts/kconfig/Makefile:104: tinker_board_2_defconfig] Error 1 make[1]: *** [Makefile:578: tinker_board_2_defconfig] Error 2 make: *** [Makefile:286: __build_one_by_one] Error 2 #### failed to build some targets (2 seconds) #### Build kernel failed! @tooz Do you know a fix? Building the kernel with $ ./build.sh -K return the following error make[4]: *** No rule to make target 'drivers/media/i2c/cam_sensor/cam_sensor.o', needed by 'drivers/media/i2c/cam_sensor/built-in.a'. Stop. make[3]: *** [scripts/Makefile.build:637: drivers/media/i2c/cam_sensor] Error 2 make[2]: *** [scripts/Makefile.build:637: drivers/media/i2c] Error 2 make[1]: *** [scripts/Makefile.build:637: drivers/media] Error 2 I checked in the folders and no objects for cam_imx219.c, cam_ov5647.c, cam_sensor_code.c are present in the folder. It is like they are not compiled at all so they cannot be added during the build process. I've also tried to use only one job to build but nothing changed. The only thing I've found to have the kernel compilation working was by changing the file kernel/drivers/media/i2c/cam_sensor/Makefile with the content: #cam_sensor-objs := \ # cam_sensor_core.o \ # cam_imx219.o \ # cam_ov5647.o cam_sensor_objs := #obj-$(CONFIG_VIDEO_CAM_SENSOR) += cam_sensor.o obj-$(CONFIG_VIDEO_CAN_SENSOR) += Nevertheless this means that no camera sensor are added at all. @tooz do you know if this is due to the missing step with clang? Do you know if there is a way to fix it? Thank you!

Hello all, is there a reference page with build instruction? I just found the reference page with the download instruction here manifest . Nevertheless, I couldn't find any guide with a procedure that describes it.