Kernel Install Fail

[ken 0]

Use TinkerBoard2

In order to disable Built In driver, I changed it to [M] in Config and made it. (CH341 / PL2303)

sudo make ARCH=arm64 tinker2_defconfig   <- OK

sudo make ARCH=arm64 menuconfig   <- CH341 / PL2303 Driver [M] Change
sudo make ARCH=arm64 rk3399-tinker_board_2.img -j24  <- OK
sudo make ARCH=arm64 install   <-- Fail

/root   cat: write error: No space left o device  

I searched and found that sudo dd if=boot.img of=/dev/mmcblk1p4

df command 

/dev/mmcblk0p8   - /root

sudo dd if=boot.img of=/dev/mmcblk0p8  

Reboot ... but Not Change Kernel

Retry Install Command Run

sudo make ARCH=arm64 install 

.....

/bin/bash ./arch/arm64/boot/install.sh 4.4.194 \
arch/arm64/boot/Image System.map "/boot"
run-parts: executing /etc/kernel/postinst.d/apt-auto-removal 4.4.194 /boot/vmlinuz-4.4.194
run-parts: executing /etc/kernel/postinst.d/initramfs-tools 4.4.194 /boot/vmlinuz-4.4.194
update-initramfs: Generating /boot/initrd.img-4.4.194
find: ‘/var/tmp/mkinitramfs_oURVYA/lib/modules/4.4.194/kernel’: No such file or directory
run-parts: executing /etc/kernel/postinst.d/pm-utils 4.4.194 /boot/vmlinuz-4.4.194

Reboot ... but Not Change Kernel

Please help me.

 

 

 

[tooz 54]

Hello @ken, 

we're looking into it, meanwhile some instruction and information on code building can be found here: https://github.com/TinkerBoard/TinkerBoard/wiki/Developer-Guide#build-os-kernel--uboot-instruction

[ken 0]

Hello @tooz,

In 4.4.194 , I changed the kernel module to a module and built it.

$ sudo dd if=boot.img of=/dev/sdd4 status=progress && sync
$ sudo reboot

No Change Kernel.

Not Found sdd4

Plese Help Me.

[tooz 54]

Hello @ken,

for Tinker Board 2S eMMC image, instead of sdd4, 

--
sudo dd if=boot.img of=/dev/mmcblk1p4 status=progress && sync
sudo reboot

--

Quote

$ sudo dd if=boot.img of=/dev/sdd4 status=progress && sync

[ken 0]

Hello @tooz

Tinker Board2 USE SD Card Image,

sudo dd if=boot.img of=/dev/mmcblk0p4 status=progress && sync

Success !

Thank You.