I am also facing the same issue.
I'm connecting the IMX219 camera (3840x2160) to tinker board 2s board.
But "v4l2-ctl --list-formats-ext" command displays only 1920x1080 resolutions.
ioctl: VIDIOC_ENUM_FMT
Type: Video Capture Multiplanar
[0]: 'YUYV' (YUYV 4:2:2)
Size: Stepwise 32x16 - 1920x1080 with step 8/8
[1]: '422P' (Planar YVU 4:2:2)
Size: Stepwise 32x16 - 1920x1080 with step 8/8
[2]: 'NV16' (Y/CbCr 4:2:2)
Size: Stepwise 32x16 - 1920x1080 with step 8/8
[3]: 'NV61' (Y/CrCb 4:2:2)
Size: Stepwise 32x16 - 1920x1080 with step 8/8
[4]: 'YM16' (Planar YUV 4:2:2 (N-C))
Size: Stepwise 32x16 - 1920x1080 with step 8/8
[5]: 'NV21' (Y/CrCb 4:2:0)
Size: Stepwise 32x16 - 1920x1080 with step 8/8
[6]: 'NV12' (Y/CbCr 4:2:0)
Size: Stepwise 32x16 - 1920x1080 with step 8/8
[7]: 'NM21' (Y/CrCb 4:2:0 (N-C))
Size: Stepwise 32x16 - 1920x1080 with step 8/8
[8]: 'NM12' (Y/CbCr 4:2:0 (N-C))
Size: Stepwise 32x16 - 1920x1080 with step 8/8
[9]: 'YU12' (Planar YUV 4:2:0)
Size: Stepwise 32x16 - 1920x1080 with step 8/8
[10]: 'YM24' (Planar YUV 4:4:4 (N-C))
Size: Stepwise 32x16 - 1920x1080 with step 8/8
[11]: 'RGGB' (8-bit Bayer RGRG/GBGB)
Size: Stepwise 32x16 - 1920x1080 with step 8/8
[12]: 'GRBG' (8-bit Bayer GRGR/BGBG)
Size: Stepwise 32x16 - 1920x1080 with step 8/8
[13]: 'GBRG' (8-bit Bayer GBGB/RGRG)
Size: Stepwise 32x16 - 1920x1080 with step 8/8
[14]: 'BA81' (8-bit Bayer BGBG/GRGR)
Size: Stepwise 32x16 - 1920x1080 with step 8/8
[15]: 'RG10' (10-bit Bayer RGRG/GBGB)
Size: Stepwise 32x16 - 1920x1080 with step 8/8
[16]: 'BA10' (10-bit Bayer GRGR/BGBG)
Size: Stepwise 32x16 - 1920x1080 with step 8/8
[17]: 'GB10' (10-bit Bayer GBGB/RGRG)
Size: Stepwise 32x16 - 1920x1080 with step 8/8
[18]: 'BG10' (10-bit Bayer BGBG/GRGR)
Size: Stepwise 32x16 - 1920x1080 with step 8/8
[19]: 'RG12' (12-bit Bayer RGRG/GBGB)
Size: Stepwise 32x16 - 1920x1080 with step 8/8
[20]: 'BA12' (12-bit Bayer GRGR/BGBG)
Size: Stepwise 32x16 - 1920x1080 with step 8/8
[21]: 'GB12' (12-bit Bayer GBGB/RGRG)
Size: Stepwise 32x16 - 1920x1080 with step 8/8
[22]: 'BG12' (12-bit Bayer BGBG/GRGR)
Size: Stepwise 32x16 - 1920x1080 with step 8/8
[23]: 'RGB3' (24-bit RGB 8-8-8)
Size: Stepwise 32x16 - 1920x1080 with step 8/8
With "media-ctl -p" command, the board seems to recognize the IMX219 correctly.
Media controller API version 0.1.0
Media device information
------------------------
driver rkisp1
model rkisp1
serial
bus info
hw revision 0x0
driver version 0.0.0
Device topology
- entity 1: rkisp1-isp-subdev (4 pads, 6 links)
type V4L2 subdev subtype Unknown flags 0
device node name /dev/v4l-subdev0
pad0: Sink
[fmt:SRGGB10_1X10/1920x1080 field:none
crop.bounds:(0,0)/1920x1080
crop:(0,0)/1920x1080]
<- "rkisp1_dmapath":0 []
<- "rockchip-mipi-dphy-rx":1 [ENABLED]
pad1: Sink
<- "rkisp1-input-params":0 [ENABLED]
pad2: Source
[fmt:YUYV8_2X8/1920x1080 field:none
crop.bounds:(0,0)/1920x1080
crop:(0,0)/1920x1080]
-> "rkisp1_selfpath":0 [ENABLED]
-> "rkisp1_mainpath":0 [ENABLED]
pad3: Source
-> "rkisp1-statistics":0 [ENABLED]
- entity 2: rkisp1_mainpath (1 pad, 1 link)
type Node subtype V4L flags 0
device node name /dev/video0
pad0: Sink
<- "rkisp1-isp-subdev":2 [ENABLED]
- entity 3: rkisp1_selfpath (1 pad, 1 link)
type Node subtype V4L flags 0
device node name /dev/video1
pad0: Sink
<- "rkisp1-isp-subdev":2 [ENABLED]
- entity 4: rkisp1_dmapath (1 pad, 1 link)
type Node subtype V4L flags 0
device node name /dev/video2
pad0: Source
-> "rkisp1-isp-subdev":0 []
- entity 5: rkisp1-statistics (1 pad, 1 link)
type Node subtype V4L flags 0
device node name /dev/video3
pad0: Sink
<- "rkisp1-isp-subdev":3 [ENABLED]
- entity 6: rkisp1-input-params (1 pad, 1 link)
type Node subtype V4L flags 0
device node name /dev/video4
pad0: Source
-> "rkisp1-isp-subdev":1 [ENABLED]
- entity 7: rockchip-mipi-dphy-rx (2 pads, 2 links)
type V4L2 subdev subtype Unknown flags 0
device node name /dev/v4l-subdev1
pad0: Sink
[fmt:SRGGB10_1X10/1920x1080@10000/300000 field:none]
<- "m00_b_imx219 1-0010":0 [ENABLED]
pad1: Source
[fmt:SRGGB10_1X10/1920x1080@10000/300000 field:none]
-> "rkisp1-isp-subdev":0 [ENABLED]
- entity 8: m00_b_imx219 1-0010 (1 pad, 1 link)
type V4L2 subdev subtype Sensor flags 0
device node name /dev/v4l-subdev2
pad0: Source
[fmt:SRGGB10_1X10/1920x1080@10000/300000 field:none]
-> "rockchip-mipi-dphy-rx":0 [ENABLED]
I appreciate your kind help in advance.
And, I cannot find the Test_tool directory. Could you give any information about the Capture_Test.sh ?
Best regards,
Kenta