Jump to content
New Wiki - User & Developer Guide ×

michiksdjfklsdjfl

Members
 View Profile  See their activity

  • Content Count

    4

  • Joined

  • Last visited

Community Reputation

0 Neutral
  1. michiksdjfklsdjfl
    Hi! Another question: We have installed the latest audio firmware (version XX 13). With the boards that are noisy, it should discard the update after the restart and we see version XX 08 again. Why doesn't it stay with V XX 13? Here is how we installed it: a. Unzip and copy the file to Tinker Board b. cd ALC4030U-FW-Tool sudo chmod a+x ./rt_UAC_utility sudo ./rt_UAC_utility --status sudo ./rt_UAC_utility --force 0x49F6_ALC4030U_ASUS_Tinker_Board_0x0BDA_V13_20220718.rfw --reset RST_2_ATTACH sudo ./rt_UAC_utility --status --reset RST_2_ATTACH sudo reboot sudo ./rt_UAC_utility --status => using this command to check the driver FW version. How to install the firmware / or is something missing in the instructions above? Attached screenshot of lsusb and the firmware versions XX 08 and XX 13 Kind regards Translated with DeepL.com (free version)
  2. michiksdjfklsdjfl
    Hi! Andere Frage: Wir haben dir neueste Audio Firmware installiert (Version XX 13). Bei den Boards die rauschen dürfte er das Update nach dem Neustart verwerfen und wir sehen wieder die Version XX 08. Warum bleibt es nicht bei V XX 13? Hier, wie wir es installiert haben: a. Unzip and copy the file to Tinker Board b. cd ALC4030U-FW-Tool sudo chmod a+x ./rt_UAC_utility sudo ./rt_UAC_utility --status sudo ./rt_UAC_utility --force 0x49F6_ALC4030U_ASUS_Tinker_Board_0x0BDA_V13_20220718.rfw --reset RST_2_ATTACH sudo ./rt_UAC_utility --status --reset RST_2_ATTACH sudo reboot sudo ./rt_UAC_utility -–status => using this command to check the driver FW version. Wie installiert man die Firmeware / oder fehlt etwas in der obigen Anleitung? Anbei Screenshot von lsusb und der Firmwareversionen XX 08 und XX 13 Liebe Grüße
  3. michiksdjfklsdjfl
    Debian Buster Audio Firmware xxx 13 On the back: Tinker Board R 2.0 R2.03
  4. michiksdjfklsdjfl started following Hissing Noise Tinkerboard R2.0
  5. michiksdjfklsdjfl
    Hi! We have the problem that the TB R2.0 starts to hiss on the analog audio output after a few hours or days. We have installed the latest firmware for the sound card, but this noise occurs on 6 of the 10 boards. Does anyone have a solution? All solutions we have found on the internet and ASUS forum do not work. LG
×
×
  • Create New...