Search the Community
Showing results for tags 'boot'.
Found 3 results
-
We use Tinkerboard 2S as a USB-HID device (On-The-Go). To use this function, TinkerBoard's USB-TypeC must be connected to a PC via USB. When we turn on TinkerBoard2S in this state, it does not Normal Boot and Tinkerboard does not start. Once the USB cable is removed, Normal Boot will occur and Tinkerboard will start. How can I Normal Boot when I turn on the Tinkerboard with the USB-TypeC cable connected to the PC? Best regards,
-
Hello, When we put "intf:fiq_debugger=off" line to config.txt and removed WiFi card (as the device we're sending to our customers does not require WiFi/BT, TInkerBoard simply won't boot. It's stuck after the messages about cfg80211 loading certificates (as shown in the attached photo). Do you have maybe any solution or workaround for this issue? Best regards, Jovan -
Hi, I am new to Tinker board. Right now i am using Tinker board S R2.0 model. I am facing issue in booting up the system. After flashing(using balenaEtcher) the OS(Tinker_Board-Debian-Buster-v3.0.11-20211026) into the eMMC storage successfully , i have connected the board to the monitor, keyboad ,mouse and the power supply(5V/3A micro USB). But the red LED light doesnot glow, even if it does, it blinks but doesnot glow continuosly. So i decided to give the power supply from the CPU and it works. But again an other issue arises. The boards switches on and i can only see the image(font) of the Tinker board but after that nothing shows up. I have attached the image which i can see after powering the board. So please help me out in resolving this issue. Let me know is there anything else that i have missed.
