Tinker Board 2 Posted February 18, 2021 Tinker Edge T Mendel 5 Eagle V3.0.2 Release Notes 1. Upgraded to Mendel 5.0 (eagle) 1.a. Upgraded U-Boot bootloader to v2019.04 1.b. Upgraded Vivante GPU drivers 1.c. Added support for new 2 GB and 4 GB SoM configurations 1.d. Separated /home with a partition layout change, so the Home directory is now preserved across system flashes 1.e. Moved all Mendel packages to a more stable APT repository 2. Supported RTL8814AU USB Wi-Fi dongle 3. Supported USB remote wakeup via keyboard/mouse connected to type C connector 4. Supported T230H display SHA256: a76f66f56dac7b6d6a65edfd3832f15c9addaf7c0532f88a5e33c4f53b0cfe84 (zip) Download link: https://dlcdnets.asus.com/pub/ASUS/mb/Embedded_IPC/Tinker_Edge_T/Tinker_Edge_T-Mendel-Eagle-V3.0.2-20201015.zip Others: https://tinker-board.asus.com/download-list.html Share this post Link to post Share on other sites
sachlj 0 Posted June 7, 2022 Is openssh-server installed? What is the username and password? Share this post Link to post Share on other sites
tooz 52 Posted June 8, 2022 hello @sachlj, yes, both the username and password are: mendel Share this post Link to post Share on other sites
sachlj 0 Posted June 8, 2022 Thank you for answer. Is OS "Tinker_Edge_T-Mendel-Eagle-V3.0.7-20210610" the full version OS or is it just an upgrade version of "Tinker_Edge_T-Mendel-Eagle-V3.0.2-20201015"? Share this post Link to post Share on other sites
sachlj 0 Posted June 8, 2022 Where is the USB driver for Windows 10 64bit? Usb driver for Windows XP? Does anyone use it? Share this post Link to post Share on other sites
sachlj 0 Posted June 8, 2022 Is it necessary to install any drivers to install MENDEL OS from RPi with Raspbian? 3 computers with Windows 10 and Tinker Borard failed to boot. The drivers failed to install even via the Windows 10 update. Share this post Link to post Share on other sites
sachlj 0 Posted June 8, 2022 Raspberry 4: Tinker_Edge_T-Mendel-Eagle-V3.0.2-20201015 $ sudo ./flash.sh Existing home partition detected, will not flash home (override with -H) target reported max download size of 419430400 bytes sending 'bootloader0' (1130 KB)... OKAY [ 0.073s] writing 'bootloader0'... OKAY [ 0.137s] finished. total time: 0.210s rebooting into bootloader... OKAY [ 0.018s] finished. total time: 0.319s target reported max download size of 419430400 bytes sending 'gpt' (33 KB)... OKAY [ 0.019s] writing 'gpt'... OKAY [ 0.223s] finished. total time: 0.243s rebooting into bootloader... OKAY [ 0.016s] finished. total time: 0.166s erasing 'misc'... OKAY [ 0.031s] finished. total time: 0.031s target reported max download size of 419430400 bytes sending 'boot' (131072 KB)... OKAY [ 5.082s] writing 'boot'... OKAY [ 2.881s] finished. total time: 7.964s error: cannot load './rootfs_arm64.img': Value too large for defined data type Failed to execute '/usr/bin/fastboot flash rootfs ./rootfs_arm64.img' ????????????????????????????????????? Share this post Link to post Share on other sites
sachlj 0 Posted June 9, 2022 I managed to flash the version of Tinker Edge T Mendel 5.2 Eagle V3.0.7 using RPi4. It was necessary to install flashboot and run the flash.sh script with root privileges. The system boot is slow, the OS is looking for a connected display and both cameras. Searching for everyone takes 2 minutes. Very poorly prepared installation. That doesn't happen with Raspberry. Share this post Link to post Share on other sites
Ming-Ta Yu 0 Posted August 1, 2022 On 6/8/2022 at 1:30 PM, sachlj said: Thank you for answer. Is OS "Tinker_Edge_T-Mendel-Eagle-V3.0.7-20210610" the full version OS or is it just an upgrade version of "Tinker_Edge_T-Mendel-Eagle-V3.0.2-20201015"? Not quite sure the full version you mean. However, V3.0.2 is based on the Mendel 5.0 Eagle release and V3.0.7 is based on the Mendel 5.2 Eagle release. I would say V3.0.7 is an upgraded version. Share this post Link to post Share on other sites
Ming-Ta Yu 0 Posted August 1, 2022 On 6/8/2022 at 1:44 PM, sachlj said: Where is the USB driver for Windows 10 64bit? Usb driver for Windows XP? Does anyone use it? It is included in the release (the file ASUS_Android_USB_drivers_for_Windows_20160628.zip is under the folder tools) and you can download it from the support site. Share this post Link to post Share on other sites
Justus 0 Posted February 28, 2023 Any info on where I can find the drivers for Windows 11. I have searched everywhere and am ready to f#cking smash this crap already. 4 units Ive purchased and not 1 has yet to function right. 2 being Tinker Edge R and T and Jetson Nano and Rock 5B). A fortune spent on nothing but useless items Ive used 3 different computers to try install Mendel and can not get a single 1 to find the board... Share this post Link to post Share on other sites
tooz 52 Posted March 1, 2023 hello @Justus, 1. download any of the tinker edge t os from: Tinker Board (asus.com) here i downloaded the latest version, which is mendel-eagle v.3.0.7 2. all the tools needed (android usb windows driver, adb, fastboot script ...) are located in the folder 'tools' >>Tinker_Edge_T-Mendel-Eagle-V3.0.7-20210610.zip\Tinker_Edge_T-Mendel-Eagle-V3.0.7-20210610\tools Share this post Link to post Share on other sites
Justus 0 Posted March 9, 2023 Thanks for reply, I did follow as instructed but nothing. I cant for life of me find a way to erase emmc and start all over again? Share this post Link to post Share on other sites
tooz 52 Posted March 10, 2023 hello @Justus, here are the windows drivers that i installed before flashing, please give it a try: https://www.asuswebstorage.com/navigate/a/#/s/9A9AE0E3C26F478CBD0DCE44A26226E54 Share this post Link to post Share on other sites
