Junhyuk Oh 0 Posted June 23, 2022 I want to remove the screen that appears during the boot process in Debian 10. Is it possible? It must be removed for use in our products. Share this post Link to post Share on other sites
Junhyuk Oh 0 Posted June 23, 2022 Currently using Tinkerboard 2s/4GB. Share this post Link to post Share on other sites
tooz 53 Posted June 23, 2022 hello @Junhyuk Oh, this patch and be applied for changing/removing logo: https://www.asuswebstorage.com/navigate/a/#/s/3CC2A30D765146908D2D7A8CC8BB99C84 if you'd like to change the boot as well, here's a little guide on how to do so: https://github.com/TinkerBoard/TinkerBoard/wiki/Developer-Guide#tinker-board-on-debian-os Share this post Link to post Share on other sites
Junhyuk Oh 0 Posted June 23, 2022 I don't want to remove the boot logo. The boot logo has already been replaced with our logo. We want to remove the six light blue boxes as shown in the photo. I tried to build the kernel by changing the settings according to the link, but the 6 light blue boxes were not removed. There was no change at all. Share this post Link to post Share on other sites
tooz 53 Posted June 23, 2022 hello @Junhyuk Oh, did you reboot the device after applying the patch? Share this post Link to post Share on other sites
Junhyuk Oh 0 Posted June 23, 2022 I upload the tinker_defconfig file. This file is what we patched... tinker2_defconfig Share this post Link to post Share on other sites
tooz 53 Posted June 24, 2022 hello @Junhyuk Oh, please revert these two changes from kernel: a11f35719c4d logo: change linux kernel logo by ADC request. 95e5b2643333 logo: Show linux logo and dump kernel log to display during system booting. 1 Share this post Link to post Share on other sites
Junhyuk Oh 0 Posted June 25, 2022 Thank you, It works Share this post Link to post Share on other sites
