TInker Board 2 Series needs Power

[kaestli 0]

Hello

I am new here. How can I power this ASUS Tinker Board 2 Series. 

Does anyone know a suitable charger or what I need to do?

 

Thanks for your help

 

20230125_085915366_iOS.heic

[tooz 53]

hello @kaestli, 

here’s the product specification for your reference, any power supply that ranges between 12v to 19v should work. (i use a 19v/4.74a power supply)

https://tinker-board.asus.com/product/tinker-board-2.html

[kaestli 0]

3 hours ago, tooz said:

hello @kaestli, 

here’s the product specification for your reference, any power supply that ranges between 12v to 19v should work. (i use a 19v/4.74a power supply)

https://tinker-board.asus.com/product/tinker-board-2.html

What is the name of your power supply?

[tooz 53]

hello @kaestli, 

i use asus adp-33aw x, it's a pretty general one, similar to this: https://www.amazon.com/Adapter-Charger-Compatible-Vivobook-X200MA/dp/B07WC4F1J4/ref=sr_1_10?crid=1X289V37LE3ZA&keywords=adp+33aw&qid=1675320094&sprefix=adp+33a%2Caps%2C279&sr=8-10

[rDo 0]

If you go mobile, use something like this one: https://www.conrad.ch/de/p/xtpower-xt-27000-dc-ao-pa-powerbank-26800-mah-li-ion-usb-usb-c-dc-buchse-3-5-mm-schwarz-2866160.html

It has a special feature not to switch off automatically when power draw goes below 4W. Beware: manual says it switches off after 12hrs. I did not check this yet.

Suitable barrel jack adapters are supplied. Verify voltage before use (long press on button, voltage blinks).