Finding the solution to install ROS and get UART working

[jjj44 0]

I am currently attempting to use a TinkerBoard2S as a rosbag recorder for various sensors,
and I am encountering a few issues.

Here are my requirements:

1. I need to install ROS on the TinkerBoard2S.
2. I need to be able to read UART for IMU data.

Initially, I attempted to install the complete ROS system via a simple deb installation, but I ran into issues because ROS does not support Debian10 well. I then tried to follow the instructions on this page (https://github.com/lawkee48/TinkerOS-ROS), which allowed me to run roscore, but I encountered a problem when trying to compile the PCL library for my Velodyne sensor, as it took too long.

Next, I tried installing Ubuntu20 on the TinkerBoard2S, which made it easy to install the full ROS system. However, I am now unsure how to enable the UART port on the Ubuntu20 system. I know that for the TinkerBoard2S, I only need to set /boot/config.txt and set the intf:uart0=on. After rebooting, the ttyS0 should be mounted as the UART port.

Any suggestions on how to proceed would be greatly appreciated. Thank you!

[tooz 47]

hello @jjj44, 

here are the commands to install ros (ros-noetic-desktop) -- verified it can be installed in debian 10 v.2.1.6 / 2.0.14

wget http://ftp.us.debian.org/debian/pool/main/g/gmp/libgmp10_6.1.2+dfsg-4+deb10u1_arm64.deb
wget http://ftp.us.debian.org/debian/pool/main/n/nettle/libhogweed4_3.4.1-1+deb10u1_arm64.deb
wget http://ftp.us.debian.org/debian/pool/main/n/nettle/libnettle6_3.4.1-1+deb10u1_arm64.deb
wget http://security.debian.org/debian-security/pool/updates/main/g/gnutls28/libgnutls30_3.6.7-4+deb10u10_arm64.deb
sudo dpkg -i libgmp10_6.1.2+dfsg-4+deb10u1_arm64.deb
sudo dpkg -i libhogweed4_3.4.1-1+deb10u1_arm64.deb
sudo dpkg -i libnettle6_3.4.1-1+deb10u1_arm64.deb
sudo dpkg -i libgnutls30_3.6.7-4+deb10u10_arm64.deb
sudo sh -c 'echo "deb http://packages.ros.org/ros/ubuntu $(lsb_release -sc) main" > /etc/apt/sources.list.d/ros-latest.list'
sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv-key C1CF6E31E6BADE8868B172B4F42ED6FBAB17C654
sudo apt update
sudo apt install ros-noetic-desktop

 

*notices like these are expected and can be ignored:

ldconfig: file /usr/lib/mali/libmali.so is truncated

ldconfig: file /usr/lib/mali/libmali.so.1.9.0 is truncated

ldconfig: file /usr/lib/mali/libmali.so.1 is truncated

ldconfig: file /usr/lib/mali/libmali-midgard-t86x-r18p0-x11.so is truncated

ldconfig: file /usr/lib/libmali.so.1 is truncated