saeed soleimanifar 0 Posted May 24, 2023 (edited) Hi everyone, I'm currently trying to disable the boot log levels on my Tinker Edge R board running Debian 10 (Buster). I've made the following modification to the `/boot/cmdline.txt` file: console=ttyS0,115200 consoleblank=0 rootwait quiet loglevel=0 However, despite saving the changes, the boot log levels remain unchanged. I would greatly appreciate any assistance or guidance on how to achieve this. Here is some additional information about my system: - OS: Debian GNU/Linux 10 (Buster) - OS Details: [Output of `cat /etc/os-release`] ``` PRETTY_NAME="Debian GNU/Linux 10 (buster)" NAME="Debian GNU/Linux" VERSION_ID="10" VERSION="10 (buster)" VERSION_CODENAME=buster ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" ``` Thank you in advance for your help and suggestions! Edited May 24, 2023 by saeed soleimanifar Share this post Link to post Share on other sites
tooz 53 Posted May 29, 2023 hello @saeed soleimanifar, by boot logs, do you mean the console logs printed whist booting? Share this post Link to post Share on other sites
saeed soleimanifar 0 Posted May 29, 2023 hello @tooz yes I mean the console log just when you power on the device . I don't want the printed lines of linux kernel I just want a blank screen and boot directly to LXDE desktop. Share this post Link to post Share on other sites
tooz 53 Posted May 30, 2023 hello @saeed soleimanifar, you can get the console log disabled by modifying the /boot/cmdline.txt: console= save and then reboot 1 Share this post Link to post Share on other sites
saeed soleimanifar 0 Posted May 30, 2023 (edited) @tooz Thanks that solved my problem. Is there any other way of removing TinkerEdgeR boot logo instead of compiling the Debian kernel and replace using following dd if=boot.img of=/dev/mmcblk1p4 I also want to set HDMI default resolution to 1024*768 in booting Linux I see it is 1920*1080 by default and will change to 1024*768 after XDesktop starts. Edited May 30, 2023 by saeed soleimanifar Share this post Link to post Share on other sites
tooz 53 Posted May 31, 2023 hello @saeed soleimanifar, 12 hours ago, saeed soleimanifar said: Is there any other way of removing TinkerEdgeR boot logo instead of compiling the Debian kernel and replace using following the fastest way to remove the 6 logos while booting, without re-compiling the kernel is to add quiet in /boot/cmdline.txt: consoleblank=1 quiet 13 hours ago, saeed soleimanifar said: I also want to set HDMI default resolution to 1024*768 in booting Linux I see it is 1920*1080 by default and will change to 1024*768 after XDesktop starts. you can change it in monitor setting: toolbar >preferences> monitor settings Share this post Link to post Share on other sites