Frank3_Wu

Hi @6a5h4, Can you share your system logs? And part of your script so we can duplicate and check? e.g. in that script, do they have loops or some to let polling rate too higher and with no suspend? or trying with our new OS version? since v2.0.8 is kind of older (20181023). https://tinker-board.asus.com/download-list.html?product=tinker-board-s Debian latest version is v3.0.11. (First Debian 10 for Tinker Board series) or Debian 9 V2.2.9. Thanks.

Hi @Eran@feelit.tech, This is strange, I guess it's due to the tool win32 disk or your SD card might have some problems. 1. Does your win32 disk run through the administrator? 2. This SD card can normally use right now? without Lock? or you can try following steps (from Google) Win32 Disk Imager Error 5: Access is Denied solution | ProgrammerAH Thanks.

Hi @tangochuynam, You need to use anthoer 2 pins for power button. From the documents, the black part is the pins location, or you can imaging that is a jumper. Thanks.

Hi, You can check this document too, page 16. https://tinker-board.asus.com/doc_tb2.html#user Also mention connector type & pin define (3v & GND) Thanks.

Hi Frank, Please try following this SOP: Tinker_Board_2_Build_and_Install_Kernel.pdf Thanks

Hi @Texas1, Nice to meet you. We have tested some demos about face detection and the results are shown below. If need more detail, please contact us. Thanks.

Hi Alexi, What sku of Tinker you used? is Tinker Board /S or Tinker Board 2/S or others.

No, is different kernel source. For Tinker Edge R please use this: https://github.com/TinkerEdgeR/debian-kernel Or you means Tinker R/BR? for Tinker R/BR or Tinker S/BR, please reference Tinker Board or Tinker Board S. And kernel source here: https://github.com/TinkerBoard/debian_kernel

Hi Omirax, We would add that config in future. And here is the source code: https://github.com/TinkerBoard2/kernel/tree/tinker_board_2-debian_10-2.0.0 and kernel header: https://github.com/TinkerBoard2/kernel/releases/download/tinker_board_2-debian_10-2.0.0/Tinker_Board_2-Debian-Buster-v2.0.0-20210413.zip (in GitHub release page) Thanks.

From our test, it should worked. Do you have other uart console cable? or try with different console software. (e.g. screen, putty, minicom, etc)

Hi @Pirate Here is the kernel header we use: https://github.com/TinkerBoard2/kernel/releases/download/tinker_board_2-debian_10-2.0.0/linux-headers-4.4.194_4.4.194-1_arm64.deb And the kernel modules, you can try to build them yourself and also let us know what configuration is needed. We can evaluate and add it to the new version of OS image.

Hi Brian, try this: use "tinker-power-manager" or find it in "tinker-config" this command-line tool. (make sure you exec it via sudo or root)

also can reference this post. https://tinkerboarding.co.uk/forum/thread-3233-post-13473.html#pid13473

Hi @feefee, Nice to meet you. You can fill in the form through this page https://iot.asus.com/inquiry/ with your inquiry. We will let our contact window to contact you. Thanks.

Hi, Thanks for your sharing photo. I think the problem still the same. Since the IMG file is a binary file with custom format. But this time the format is different with before. Therefore, it is reasonable to be different in HEX. For macOS, it is just possible to mount some IMG or Disk files. But it needs to be a specific formats or Filesystem's dump (contain partition define information, etc). But in this case our new IMG is customized format from the SoC vendor. So you can not mount in the PC, but it still can be work & bootable for Tinker Board after you flash the OS.